Fire And Water Damage Restoration in Preston County County, WV
The fire is out, but the soot, the smell and the water it left behind are only getting started, and you need help today. Call the dispatch line and we will connect you with an independent restoration crew in Preston County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Preston County and can actually get there.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They carry their own license and liability coverage, write their own estimates and stand behind their own workmanship. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Left alone for a few days, it bonds with paint and wood finishes, and exposed metal starts to corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Wet drywall, subfloor and insulation can start growing mold within 24 to 48 hours. Every hour you wait adds cost to the job.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. A big share of our calls come in overnight, often within an hour of the fire department leaving, and the line is staffed for exactly that. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors in the network generally do fire and smoke restoration as a core part of their business. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign a work authorization, ask for a copy of the contractor's license and certificate of insurance and confirm both yourself; any reputable restoration company expects that question.
Being local makes a real difference. Crews working across Preston County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know which jurisdiction issues permits for your address, whether that is a city office or the county building department, and how to plan around it.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Fire And Water Damage Restoration Services Available in Preston County
Any fire leaves several separate problems behind at the same time: an open, unsecured structure, soot everywhere, odor trapped in the materials, water from the hoses and a rebuild waiting at the end. The contractors we connect you with cover every phase, and plenty of them take a job all the way from board-up to final paint.
Emergency Fire Damage Response
The first visit after a fire is about stopping the damage from spreading. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Truck-mounted or portable extractors pull up the water left by the hoses, and HEPA air scrubbers start capturing the fine soot still floating through the rooms. It is not glamorous work, yet it protects what survived, and most policies require reasonable steps like these to keep the loss from getting worse.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
Residential crews work room by room: removing charred materials, HEPA-vacuuming loose soot before anyone touches it with a wet rag, cleaning walls and ceilings with dry chemical sponges, then wet-cleaning with degreasers matched to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some can be cleaned and deodorized and some cannot, and a good contractor will tell you which is which instead of throwing everything in a dumpster.
Fire Damage Removal for Businesses
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: lost revenue for every day the doors stay closed. Commercial crews plan the job around getting you open again, which often means sealing off the affected area with poly sheeting and negative air machines so the unaffected parts of the building can keep operating.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Commercial jobs usually need after-hours or weekend scheduling, which experienced commercial contractors are used to arranging.
Professional Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly smoked paint can usually be saved with cleaning, while drywall saturated with soot is often cheaper to cut out and replace. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Smoke Odor Removal and Deodorization
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Because hot smoke moves toward cooler spaces, it settles inside closets, attics, cabinets and wall cavities well away from the fire itself.
Effective deodorization works in layers. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Air fresheners only cover the smell for a few days, and this process aims to remove it.
Water Damage From Firefighting
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. All of it soaks into subfloors, insulation and wall cavities, carrying dissolved soot along with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. Readings get logged every day until materials reach a dry standard. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out and Cleaning
Personal belongings often need more careful handling than the structure itself. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Mention photos, documents and heirlooms to the contractor up front so those items get priority. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Structural Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. It is worth asking how the contractor pulls permits, which trades they subcontract and how scope changes get approved and documented.
What to Expect From the Fire And Water Damage Restoration Process
Every fire is different, but the sequence of work is fairly consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you with an available independent contractor serving Preston County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project lead walks the whole property, tests surfaces to identify the soot, takes moisture readings and traces how far the smoke spread. You get a written scope and estimate before major work starts, often in the same Xactimate format adjusters use.
Mitigation, cleaning and drying
Crews remove charred materials, HEPA-vacuum loose soot, clean each surface with the right method for its residue, and run drying equipment until readings return to normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Repairs and reconstruction bring the property back to pre-loss condition, followed by a final walkthrough with you to confirm everything on the scope was completed.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Fire And Water Damage Restoration
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
The contractors we connect you with provide a written estimate after they inspect the damage, before major work begins. No surprise line items appear at the end, and any change in scope gets approved by you first. There is never a charge to you for using the referral line.
Fast response, local dispatch
We route your call to an independent crew already working near you, not one driving in from hours away. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask for it before you sign, along with what happens if smoke odor returns after the job is finished. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Documentation can make or break a fire claim. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
Board-up, water extraction, soot cleaning, odor removal, contents and rebuild are often handled by the same contractor, so you are not juggling five phone numbers.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden, accidental fire damage, including smoke damage and the water used to put the fire out. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Keep receipts for everything: meals, lodging, clothing and emergency purchases. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
In most cases you are free to choose your own restoration contractor. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read any work authorization carefully, and be cautious about signing an assignment of benefits without understanding exactly what rights you are handing over.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Business owners have a few extra policy details to keep in mind. Business interruption coverage, if you carry it, may replace lost income while you are closed, and it usually depends on proving the restoration timeline. Ask the contractor for dated progress reports you can hand straight to your insurer.
Real Stories From People Who Called After a Fire
These are accounts from people who called the dispatch line and were connected with an independent contractor.
I called at about 11 at night after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later there was no sign anything had happened.
Danielle R.Homeowner, Preston County
Our fryer caught and the fire got into the hood. We lost four days of business, which hurt, but it would have been much worse without the crew we were connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. Their estimate matched the final invoice.
Marcus T.Restaurant owner, Preston County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor explained what a puffback is, cleaned the ducts first so we would not keep blowing soot around, and then went room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Preston County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. The crew boarded up the garage the same day, pulled out the attic insulation that was holding the smell, and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Preston County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed a contractor who could juggle the tenants, the owner's insurance and several renters policies at once. The contractor kept detailed notes on each unit and gave me separate documentation for each claim. Communication was excellent from start to finish.
Robert M.Property manager, Preston County
Answers to Common Fire Damage Questions
How fast can a Fire And Water Damage Restoration contractor arrive in Preston County?
When the situation is urgent, such as an open roof, blown-out windows or standing water, many network contractors can usually reach you within a few hours. Exact timing depends on your location, the time of day, weather and how busy local crews are. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Calling our referral line costs you nothing.
What emergency services are available after a fire?
Typical emergency services are window and door board-up, roof tarping, water extraction, temporary power coordination, HEPA air filtration, and securing the property from weather and intruders. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me operates as a free referral service. We connect callers with independent local contractors, licensed and insured, who carry out the work and are responsible for it. We recommend verifying any contractor's license and insurance before you authorize work.
Will my homeowners insurance cover fire damage removal?
Most standard homeowners policies cover sudden, accidental fire damage, including smoke and firefighting water, but coverage depends on your specific policy and deductible. Open a claim with your carrier right away and ask about Additional Living Expenses coverage. Contractors used to fire work can provide photos, moisture logs and estimates that support your claim.
Can smoke smell really be removed, or will it come back?
It can be removed when the work is done right. Smell returns when its source is left behind, most often in insulation, framing, ducts or belongings. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department clears the home and the damage is limited to one room, staying may be possible with that area closed off, but a professional assessment is the safest way to decide. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond those items, hold off. A lot of things that look ruined, from dishes and clothing to furniture and some electronics, respond well to professional cleaning. Keep damaged items until the adjuster has seen them or you have photographed them.
How long does fire damage restoration take?
A small kitchen fire with limited smoke spread can often be cleaned and deodorized in a few days to two weeks. Larger losses that need drying, demolition and reconstruction can take several weeks to several months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
Usually not. Most policyholders can choose their own restoration contractor. Your insurer's preferred vendor may be a fine option, but the decision is yours. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Serving All of Preston County With Fire And Water Damage Restoration
Our dispatch line covers all of Preston County, from the county seat and its suburbs to small towns and unincorporated rural areas. No matter where in the county you are, one phone number connects you with an independent contractor who works nearby.
Rural fires bring their own challenges. Outbuildings like garages, workshops and barns tend to store fuel, tools and equipment that burn hot and leave thick residue. Homes on private wells may need the water system inspected if it was used during firefighting, and longer distances make fast board-up all the more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. The cities and zip codes we serve across the county are listed below.
Common fire calls around Preston County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
The Clock Started the Moment the Fire Went Out.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Preston County.
