Fire And Water Damage Restoration in Hurricane, WV
The fire was in the kitchen, but the water from the hoses is now in the basement, the subfloor and every wall cavity on the first floor. Call the dispatch line and we will connect you with a licensed, insured independent contractor near Hurricane that handles both water drying and soot cleanup together.
- Water extraction & structural drying
- Moisture mapping
- Soot & smoke cleanup
- Licensed & insured independent pros
Why Fire and Water Damage Need One Plan in Hurricane
Almost every fire loss is also a water loss. Hoses move huge volumes of water, sprinkler heads open and heat can burst supply lines. Because the water picks up soot on its way, it carries contamination into subfloors, wall cavities and insulation.
The order of operations matters. Extraction and drying have to start fast, often before soot cleaning, because mold can begin within 24 to 48 hours on wet drywall and wood. Yet air movers can spread soot, so crews contain the area, HEPA-vacuum first and run scrubbers alongside the drying gear.
Drying is driven by psychrometrics, the relationship between air temperature, humidity and moisture. Crews map moisture with meters and thermal imaging, set air movers and low-grain refrigerant dehumidifiers, and log readings daily until materials hit dry standard.
Re Fire Me is a free referral service, not the contractor. We route Hurricane calls to independent, licensed and insured contractors experienced in both, many trained to IICRC S500 and S700.
Where firefighting water hides
- Under hardwood, laminate and tile
- Inside wall cavities and insulation
- In ceiling drywall below upper floors
- Basements and crawlspaces
- Behind cabinets and baseboards
Why Choose Our Specialized Fire And Water Damage Restoration in Hurricane, WV
You need a contractor fluent in both fire and water work. This is what independent contractors in the Hurricane network bring to combined losses.
Licensed & insured contractors
We connect you with independent, licensed and insured businesses handling both water mitigation and fire restoration.
Upfront written pricing
You get a written scope covering extraction, drying days, equipment, soot cleaning and repairs before major work starts.
Rapid local dispatch
Drying has to start fast, and crews near Hurricane can often begin extraction within hours.
Drying & detection equipment
Truck-mount extractors, LGR dehumidifiers, air movers, wall-cavity drying systems, moisture meters, thermal cameras and HEPA scrubbers.
Combined Fire and Water Solutions Around Hurricane
Combined losses usually involve the following.
Water Extraction
Standing water is removed with submersible pumps and truck-mounted extractors, including from carpet and pad. The faster the extraction, the shorter the drying.
Moisture Mapping
Meters and thermal cameras follow water into walls, under floors and through ceilings. The map sets where drying equipment goes and what has to be removed.
Structural Drying
Equipment placement follows psychrometric readings, and wall cavities are dried in place when possible. Readings are logged daily.
Soot Cleanup in Wet Areas
HEPA vacuuming happens before air movers start, then water-borne soot is cleaned from floors and lower walls.
Mold Prevention
Quick drying, removal of materials that cannot dry in time and antimicrobial treatment reduce the chance of mold growth.
Repairs After Drying
Once materials reach dry standard, removed drywall, flooring and insulation are replaced and finishes restored.
Water Categories and Why Firefighting Water Is Different
Water restoration professionals classify water by contamination level. Category 1 is clean supply water, Category 2 is somewhat contaminated, and Category 3 is grossly contaminated, like sewage or floodwater.
Hose water may start clean, but it collects soot, ash, chemicals and debris as it flows through the structure. Depending on contact and time, it may be handled as Category 2 or 3, which changes what can be dried in place and what must come out.
That is exactly why combined losses need a contractor fluent in both. Carpet pad soaked with sooty water is usually removed. Drywall wicking dirty water above a certain height may be cut out. Hard surfaces get cleaned and treated before drying finishes.
Drying logs are one of the most useful documents on a fire and water job. Each day, technicians record moisture readings at marked points, along with temperature and humidity inside and outside the drying area. Those numbers show whether drying is progressing and when materials reach dry standard. Adjusters rely on them to approve equipment charges, and you can rely on them to know the structure is actually dry before walls are closed up and finishes go back on.
Fire and Water Situations We Hear About Most
Upstairs fire, downstairs water
The fire is on the second floor, but the hose water comes through the ceilings below. The first floor needs moisture mapping, drying and ceiling repairs even though it never saw a flame.
Sprinkler discharge in a business
A small fire triggers sprinkler heads in an office or warehouse. The fire is minor, but water spreads across carpet, inventory and lower walls, and drying has to start immediately to reopen quickly.
Pipes burst by heat
Heat from a fire can melt or burst supply lines inside walls, so water keeps flowing after the fire is out. Shutting off the water, finding the break and drying the cavity become urgent.
Crawlspace and basement flooding
Water collects in crawlspaces and basements where it is out of sight. Extraction, dehumidification and moisture monitoring there prevent mold and wood rot under the house.
Hardwood floors soaked by hoses
Hardwood floors that took on firefighting water can cup and buckle. Specialized floor drying mats and dehumidifiers can sometimes save them if drying starts quickly, while waiting usually means replacement.
How Fire and Water Restoration Works in Hurricane
Call Dispatch
Call +1-866-484-1409 and describe where the water is and where the fire started. We connect you with an independent contractor near Hurricane.
Rapid Mobile Arrival
The crew arrives, extracts standing water and sets up containment and air scrubbers.
Expert Assessment & Quote
After mapping moisture and soot, the lead provides a written scope with drying time and repairs.
Resolution & Final Walkthrough
Drying, cleaning and repairs finish in sequence, with logs provided and a final walkthrough.
Fire and Water Stories From Hurricane
Upstairs had the fire, downstairs got all the water. The crew mapped the moisture with a thermal camera and found water inside walls I never would have checked.
Ellen W.Homeowner, Hurricane
Our sprinkler system went off during a small fire in our warehouse office. They dried the concrete and racks, cleaned the soot and had us operating again in a week.
Frank Z.Business owner, Hurricane
They gave us daily moisture readings, and the adjuster accepted their drying logs without question. No mold, no smell.
Angela and Ray T.Homeowners, Hurricane
They explained why the carpet could be saved but the pad had to go. The drying took four days and the house smells normal again.
Josh M.Homeowner, Hurricane
Fire and Water Damage Questions
Why is there so much water damage after a fire?
Hoses, sprinklers and heat-burst pipes all add water. That water soaks into floors, walls and ceilings far from where the fire burned.
Should drying or soot cleaning happen first?
Usually, extraction and drying start first because mold can begin within 24 to 48 hours. Crews HEPA-vacuum loose soot and run air scrubbers so the drying equipment does not spread residue.
How long does it take to dry a home after a fire?
Most structures reach dry standard in three to five days with proper equipment. Hardwood, plaster and concrete can take longer.
Can firefighting water cause mold?
It can. Mold may start on wet drywall, wood and insulation within a day or two. Fast extraction and professional drying are the best prevention.
Is Re Fire Me the restoration contractor?
No. Re Fire Me is a free referral service connecting you with independent, licensed and insured contractors. The contractor performs and is responsible for the work.
Does insurance cover water damage from putting out a fire?
Generally, yes. Water used to extinguish a covered fire is typically part of the fire claim. Review your policy and keep the drying records.
Fire and Water Coverage in Hurricane and Nearby
The dispatch line covers Hurricane and the surrounding communities 24 hours a day. Contractors work on houses, condos, apartments and sprinklered commercial buildings. See nearby cities and zip codes below.
Contractors around Hurricane handle combined fire and water losses in homes with basements, slab foundations and crawlspaces.
Water Will Not Wait. Neither Should You.
Mold can start on wet materials in as little as a day. Call +1-866-484-1409 to connect with an independent fire and water contractor in Hurricane.
