Smoke Damage Restoration in Floyd County County, IA
Whether it was a grease fire on the stove or a loss that took out half the house, the next few hours decide how much can be saved. Call the dispatch line and we will connect you with an independent restoration crew in Floyd County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is pick up at any hour, ask the handful of questions that tell us what kind of fire loss you have, and route you to an independent, licensed and insured restoration contractor serving Floyd County that has the equipment and the availability to respond.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our job is to shorten the distance between the fire and the first qualified person walking through your door.
Fire damage does not hold still. Soot is acidic. Within the first few hours it starts to yellow plastics, discolor grout and tarnish bathroom fixtures. Left alone for a few days, it bonds with paint and wood finishes, and exposed metal starts to corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Wet drywall, subfloor and insulation can start growing mold within 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. A big share of our calls come in overnight, often within an hour of the fire department leaving, and the line is staffed for exactly that. When you call, a real person asks where the fire started, whether the power is on, whether the structure has been cleared for entry and whether there is standing water. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign anything, ask the contractor directly about their license, insurance certificate and training, and verify them yourself.
Being local makes a real difference. Contractors covering Floyd County handle in-town homes and apartments as well as rural properties with outbuildings, detached garages and long private drives. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Core Smoke Damage Restoration Services Available in Floyd County
Any fire leaves several separate problems behind at the same time: an open, unsecured structure, soot everywhere, odor trapped in the materials, water from the hoses and a rebuild waiting at the end. The contractors we connect you with handle each phase, and many handle all of them start to finish.
Emergency Fire Damage Response
The first visit after a fire is about stopping the damage from spreading. A responding crew will typically confirm the structure is safe to enter, coordinate with the utility company on power and gas, and board up windows and doors that firefighters had to force or vent. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Standing water from fire hoses gets extracted with truck-mounted or portable units, and air scrubbers fitted with HEPA filters go in to start pulling fine soot out of the air. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
Residential crews work room by room: removing charred materials, HEPA-vacuuming loose soot before anyone touches it with a wet rag, cleaning walls and ceilings with dry chemical sponges, then wet-cleaning with degreasers matched to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Commercial Fire Damage Removal
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Commercial jobs usually need after-hours or weekend scheduling, which experienced commercial contractors are used to arranging.
Professional Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly smoked paint can usually be saved with cleaning, while drywall saturated with soot is often cheaper to cut out and replace. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Deodorization and Smoke Odor Removal
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Hot smoke also travels toward cooler areas, so it ends up in closets, cabinets, attics and wall cavities far from where the fire actually burned.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Sprays and plug-ins just mask the smell for a few days, which is why a layered process matters.
Firefighting Water Extraction and Drying
People are often surprised that the water does as much damage as the fire. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. All of it soaks into subfloors, insulation and wall cavities, carrying dissolved soot along with it.
The drying side of a fire job follows the same science as any water loss. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. Readings get logged every day until materials reach a dry standard. Rushing or skipping this step is how a fire claim turns into a mold claim six weeks later.
Contents Pack-Out, Inventory and Cleaning
Personal belongings often need more careful handling than the structure itself. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Tell the contractor about family photos, important papers and heirlooms before work starts so they get handled first. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Structural Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
How a Smoke Damage Restoration Job Typically Runs
No two fires look the same, but the order of operations on a professional job is pretty consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
Call +1-866-484-1409 and a dispatcher asks a few quick questions about where the fire started, whether utilities are on, whether the fire department has cleared the building and whether there is standing water. Then we connect you directly with an available independent contractor that serves Floyd County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project manager walks every room, tests surfaces to identify soot types, takes moisture readings and checks how far smoke traveled. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Charred materials come out, loose soot is HEPA-vacuumed, surfaces are cleaned with methods matched to the residue, and drying equipment runs until moisture readings come back normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. HVAC ducts are cleaned so the system does not redistribute soot the first time it runs.
Rebuild and final walkthrough
Repairs and reconstruction bring the property back to pre-loss condition, followed by a final walkthrough with you to confirm everything on the scope was completed.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Property Owners Choose Re Fire Me for Smoke Damage Restoration
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. From the calls we take every day, these are the things that make the biggest difference to how the job goes.
Upfront, written pricing
The contractors we connect you with provide a written estimate after they inspect the damage, before major work begins. Nothing gets added at the end without your sign-off, and scope changes are approved before the work happens. There is never a charge to you for using the referral line.
Fast response, local dispatch
Your call goes to an independent crew that already works close to you, not one driving in from far across the region. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. Ask for their license and certificate of insurance and verify them yourself, which is good practice with any contractor and something the good ones expect.
Work they stand behind
Reputable restoration companies are willing to put their workmanship warranty on paper. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Documentation can make or break a fire claim. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
How Insurance Usually Works After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the loss to your insurer as soon as possible and ask whether your policy includes Additional Living Expenses (ALE), which can cover a hotel or rental if the home is not livable. Save every receipt, from hotel nights to meals to replacement clothing. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
In most cases you are free to choose your own restoration contractor. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read any work authorization carefully, and be cautious about signing an assignment of benefits without understanding exactly what rights you are handing over.
When the contractor and the adjuster disagree about scope, the contractor's photos, moisture logs and line-item estimate are what settle it. That is one more reason to work with a crew that documents carefully from day one.
Commercial policies add a few wrinkles worth knowing about. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can pass directly to your carrier.
Real Stories From People Who Called After a Fire
These are accounts from people who called the dispatch line and were connected with an independent contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. Within ten minutes of calling, the dispatcher had me on the phone with a restoration company. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later there was no sign anything had happened.
Danielle R.Homeowner, Floyd County
Our fryer caught and the fire got into the hood. We lost four days of business, which hurt, but it would have been much worse without the crew we were connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. The final invoice matched their estimate.
Marcus T.Restaurant owner, Floyd County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Floyd County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were straightforward about what they could save and what they couldn't. The smell is completely gone.
James and Priya S.Homeowners, Floyd County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed a contractor who could juggle the tenants, the owner's insurance and several renters policies at once. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Floyd County
Fire Damage Questions We Hear Every Day
How fast can a Smoke Damage Restoration contractor arrive in Floyd County?
For urgent situations like an open roof, broken windows or standing water, many independent contractors in our network can be on site within a few hours of your call. Real arrival times vary with distance, time of day, weather and local demand. The dispatcher will tell you straight what to expect instead of promising a time that cannot be met.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency measures such as board-up or water extraction may begin immediately to stop further damage, and the contractor should explain how those are billed first. Using our referral line is always free.
What emergency services are available after a fire?
Typical emergency services are window and door board-up, roof tarping, water extraction, temporary power coordination, HEPA air filtration, and securing the property from weather and intruders. Many crews can also pull out urgent belongings such as medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Call your insurer to open a claim, and ask whether you have Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Smell returns when its source is left behind, most often in insulation, framing, ducts or belongings. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. Ask the contractor how they handle odor that returns after the job.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department clears the home and the damage is limited to one room, staying may be possible with that area closed off, but a professional assessment is the safest way to decide. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Discard any food, medicine or cosmetics exposed to heat, smoke or water, along with refrigerated food if the power went out. Beyond those items, hold off. Many items that look ruined, including hard goods, clothing, furniture and even some electronics, can be professionally cleaned. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A contained kitchen fire with limited smoke spread is often cleaned and deodorized within a few days to two weeks. Larger losses that need drying, demolition and reconstruction can take several weeks to several months, depending on permits, materials and insurance approvals. The contractor should give you a realistic timeline with the written scope.
Do I have to use the contractor my insurance company recommends?
In most cases, no. You generally have the right to choose your own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Smoke Damage Restoration Coverage Throughout Floyd County
Our dispatch line covers all of Floyd County, from the county seat and its suburbs to small towns and unincorporated rural areas. No matter where in the county you are, one phone number connects you with an independent contractor who works nearby.
Rural fires bring their own challenges. Outbuildings like garages, workshops and barns tend to store fuel, tools and equipment that burn hot and leave thick residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. The cities and zip codes we serve across the county are listed below.
Common fire calls around Floyd County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
The Clock Started the Moment the Fire Went Out.
Every hour that soot and water sit, the restoration bill grows. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Floyd County.
