Fire Restoration Company in Washington County County, MN
Whether it was a grease fire on the stove or a loss that took out half the house, the next few hours decide how much can be saved. Call the dispatch line and we will connect you with an independent restoration crew in Washington County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We do not swing the hammers or run the dehumidifiers ourselves. What we do is pick up at any hour, ask the handful of questions that tell us what kind of fire loss you have, and route you to an independent, licensed and insured restoration contractor serving Washington County that has the equipment and the availability to respond.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our job is to shorten the distance between the fire and the first qualified person walking through your door.
Fire damage does not hold still. Soot is acidic. Within the first few hours it starts to yellow plastics, discolor grout and tarnish bathroom fixtures. Over the next several days it works into painted drywall and wood finishes, and bare metal begins to pit and corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Mold can begin growing on wet drywall and insulation in as little as 24 to 48 hours. Every hour you wait adds cost to the job.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors in the network generally do fire and smoke restoration as a core part of their business. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign a work authorization, ask for a copy of the contractor's license and certificate of insurance and confirm both yourself; any reputable restoration company expects that question.
Being local makes a real difference. Contractors covering Washington County handle in-town homes and apartments as well as rural properties with outbuildings, detached garages and long private drives. They know which jurisdiction issues permits for your address, whether that is a city office or the county building department, and how to plan around it.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Fire Restoration Company Services Available in Washington County
A fire loss is really four or five different problems at once: an unsecured structure, soot on every surface, smoke odor in the building materials, water from firefighting and, eventually, a rebuild. The contractors we connect you with handle each phase, and many handle all of them start to finish.
24/7 Emergency Fire Damage Response
The first visit after a fire is about stopping the damage from spreading. A responding crew will typically confirm the structure is safe to enter, coordinate with the utility company on power and gas, and board up windows and doors that firefighters had to force or vent. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Standing water from fire hoses gets extracted with truck-mounted or portable units, and air scrubbers fitted with HEPA filters go in to start pulling fine soot out of the air. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some can be cleaned and deodorized and some cannot, and a good contractor will tell you which is which instead of throwing everything in a dumpster.
Fire Damage Removal for Businesses
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. Grease fires in a hood system leave heavy, oily residue in the ductwork, on stainless steel and inside walk-in coolers, and the health department will want to see the kitchen properly cleaned before reopening. Offices raise different problems, mainly corrosive smoke reaching electronics, server rooms and paper records. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. Then there is the furnace puffback, where a misfiring oil burner blows fuel-oil soot through the ducts and into every room of the house.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly affected paint can often be cleaned and kept, while heavily affected drywall may be cheaper to replace than to clean. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Smoke Odor Removal and Deodorization
Cleaning what you can see does not remove what you can smell. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Because hot smoke moves toward cooler spaces, it settles inside closets, attics, cabinets and wall cavities well away from the fire itself.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Framing and subfloor that still hold odor after cleaning are usually sealed with a shellac-based odor-blocking primer before new drywall goes up. Air fresheners only cover the smell for a few days, and this process aims to remove it.
Water Damage From Firefighting
People are often surprised that the water does as much damage as the fire. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. All of it soaks into subfloors, insulation and wall cavities, carrying dissolved soot along with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. They take daily readings until the materials are back to normal moisture levels. Rushing or skipping this step is how a fire claim turns into a mold claim six weeks later.
Contents Pack-Out and Cleaning
Your belongings often need more care than the building. When rooms need demolition or heavy cleaning, crews pack out salvageable contents, inventory them with photos and box labels, and move them to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Mention photos, documents and heirlooms to the contractor up front so those items get priority. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Fire Damage Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. A lot of restoration contractors take the job from mitigation through the final coat of paint, so you are not starting from scratch with a new company mid-project.
Structural work after a fire usually needs permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. It is worth asking how the contractor pulls permits, which trades they subcontract and how scope changes get approved and documented.
How a Fire Restoration Company Job Typically Runs
Every fire is different, but the sequence of work is fairly consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you directly with an available independent contractor that serves Washington County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project lead walks the whole property, tests surfaces to identify the soot, takes moisture readings and traces how far the smoke spread. You get a written scope and estimate before major work starts, often in the same Xactimate format adjusters use.
Mitigation, cleaning and drying
Crews remove charred materials, HEPA-vacuum loose soot, clean each surface with the right method for its residue, and run drying equipment until readings return to normal.
Deodorization and HVAC cleaning
Once the cleaning is done, the crew treats lingering odor with thermal fogging, hydroxyl or ozone, and seals any framing that still holds smoke. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Fire Restoration Company
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. From the calls we take every day, these are the things that make the biggest difference to how the job goes.
Upfront, written pricing
The contractors we connect you with provide a written estimate after they inspect the damage, before major work begins. No surprise line items appear at the end, and any change in scope gets approved by you first. There is never a charge to you for using the referral line.
Fast response, local dispatch
Your call goes to an independent crew that already works close to you, not one driving in from far across the region. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. Ask for their license and certificate of insurance and verify them yourself, which is good practice with any contractor and something the good ones expect.
Work they stand behind
Reputable restoration companies are willing to put their workmanship warranty on paper. Ask for it before you sign, along with what happens if smoke odor returns after the job is finished. Any warranty comes from the contractor, who is responsible for the work they perform.
Insurance-ready documentation
Documentation can make or break a fire claim. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Save every receipt, from hotel nights to meals to replacement clothing. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
In most cases you are free to choose your own restoration contractor. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read any work authorization carefully, and be cautious about signing an assignment of benefits without understanding exactly what rights you are handing over.
When the contractor and the adjuster disagree about scope, the contractor's photos, moisture logs and line-item estimate are what settle it. That is one more reason to work with a crew that documents carefully from day one.
Business owners have a few extra policy details to keep in mind. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can pass directly to your carrier.
Real Stories From People Who Called After a Fire
Here is what a few callers shared after being connected with an independent restoration contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later there was no sign anything had happened.
Danielle R.Homeowner, Washington County
Our fryer caught and the fire got into the hood. Losing four days of business was painful, but it could have been a lot worse without the crew we got connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. Their estimate matched the final invoice.
Marcus T.Restaurant owner, Washington County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I honestly did not know where to start. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Washington County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were straightforward about what they could save and what they couldn't. The smell is completely gone.
James and Priya S.Homeowners, Washington County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. The contractor kept detailed notes on each unit and gave me separate documentation for each claim. Communication was excellent from start to finish.
Robert M.Property manager, Washington County
Answers to Common Fire Damage Questions
How fast can a Fire Restoration Company contractor arrive in Washington County?
When the situation is urgent, such as an open roof, blown-out windows or standing water, many network contractors can usually reach you within a few hours. Real arrival times vary with distance, time of day, weather and local demand. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. The contractor we connect you with inspects the damage and gives you a written estimate before major work begins. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Using our referral line is always free.
What emergency services are available after a fire?
Emergency services include board-up of broken windows and doors, roof tarping, water extraction, temporary power coordination, HEPA air scrubbing, and securing the property against weather, theft and vandalism. Many crews can also pull out urgent belongings such as medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me operates as a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. We recommend verifying any contractor's license and insurance before you authorize work.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Call your insurer to open a claim, and ask whether you have Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
It can be removed when the work is done right. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough job removes or cleans those materials, treats the remaining odor with thermal fogging, hydroxyl or ozone, and seals affected framing before rebuilding. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department clears the home and the damage is limited to one room, staying may be possible with that area closed off, but a professional assessment is the safest way to decide. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond those items, hold off. Many items that look ruined, including hard goods, clothing, furniture and even some electronics, can be professionally cleaned. Keep damaged items until the adjuster has seen them or you have photographed them.
How long does fire damage restoration take?
A small kitchen fire with limited smoke spread can often be cleaned and deodorized in a few days to two weeks. Larger losses that need drying, demolition and reconstruction can take several weeks to several months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
Usually not. Most policyholders can choose their own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Review your policy wording and tell your adjuster which contractor you picked so they can coordinate.
Fire Restoration Company Coverage Throughout Washington County
Our dispatch line covers all of Washington County, from the county seat and its suburbs to small towns and unincorporated rural areas. Wherever your property sits in the county, the same number connects you with an independent contractor who works in your area.
Rural fires bring their own challenges. Outbuildings like garages, workshops and barns tend to store fuel, tools and equipment that burn hot and leave thick residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. You will find the cities and zip codes we serve throughout the county listed below.
Common fire calls around Washington County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
Smoke Damage Spreads Fast. Get Help Today.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Washington County.
