Fire Restoration Company in Raleigh County County, WV
Whether it was a grease fire on the stove or a loss that took out half the house, the next few hours decide how much can be saved. Call the dispatch line and we will connect you with an independent restoration crew in Raleigh County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We do not swing the hammers or run the dehumidifiers ourselves. What we do is pick up at any hour, ask the handful of questions that tell us what kind of fire loss you have, and route you to an independent, licensed and insured restoration contractor serving Raleigh County that has the equipment and the availability to respond.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They carry their own license and liability coverage, write their own estimates and stand behind their own workmanship. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. Within the first few hours it starts to yellow plastics, discolor grout and tarnish bathroom fixtures. Left alone for a few days, it bonds with paint and wood finishes, and exposed metal starts to corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Wet drywall, subfloor and insulation can start growing mold within 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. When you call, a real person asks where the fire started, whether the power is on, whether the structure has been cleared for entry and whether there is standing water. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign a work authorization, ask for a copy of the contractor's license and certificate of insurance and confirm both yourself; any reputable restoration company expects that question.
Being local makes a real difference. Contractors covering Raleigh County handle in-town homes and apartments as well as rural properties with outbuildings, detached garages and long private drives. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Core Fire Restoration Company Services Available in Raleigh County
Any fire leaves several separate problems behind at the same time: an open, unsecured structure, soot everywhere, odor trapped in the materials, water from the hoses and a rebuild waiting at the end. The contractors we connect you with handle each phase, and many handle all of them start to finish.
Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Truck-mounted or portable extractors pull up the water left by the hoses, and HEPA air scrubbers start capturing the fine soot still floating through the rooms. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each one leaves a different kind of residue and needs a different cleaning approach.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Commercial Fire Damage Removal
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. Grease fires in a hood system leave heavy, oily residue in the ductwork, on stainless steel and inside walk-in coolers, and the health department will want to see the kitchen properly cleaned before reopening. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Professional Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly smoked paint can usually be saved with cleaning, while drywall saturated with soot is often cheaper to cut out and replace. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Smoke Odor Removal and Deodorization
Cleaning what you can see does not remove what you can smell. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Hot smoke also travels toward cooler areas, so it ends up in closets, cabinets, attics and wall cavities far from where the fire actually burned.
Effective deodorization works in layers. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Framing and subfloor that still hold odor after cleaning are usually sealed with a shellac-based odor-blocking primer before new drywall goes up. Sprays and plug-ins just mask the smell for a few days, which is why a layered process matters.
Firefighting Water Extraction and Drying
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. That water soaks into subfloors, wall cavities and insulation, and it carries soot with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. Readings get logged every day until materials reach a dry standard. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out, Inventory and Cleaning
Your belongings often need more care than the building. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Tell the contractor about family photos, important papers and heirlooms before work starts so they get handled first. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Fire Damage Repair and Reconstruction
Once the property is cleaned, dried and deodorized, the rebuild begins. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Structural work after a fire usually needs permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
How a Fire Restoration Company Job Typically Runs
No two fires look the same, but the order of operations on a professional job is pretty consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you directly with an available independent contractor that serves Raleigh County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project manager walks every room, tests surfaces to identify soot types, takes moisture readings and checks how far smoke traveled. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Crews remove charred materials, HEPA-vacuum loose soot, clean each surface with the right method for its residue, and run drying equipment until readings return to normal.
Deodorization and HVAC cleaning
Once the cleaning is done, the crew treats lingering odor with thermal fogging, hydroxyl or ozone, and seals any framing that still holds smoke. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Fire Restoration Company
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
After inspecting the damage, the contractor puts the estimate in writing before any major work starts. Nothing gets added at the end without your sign-off, and scope changes are approved before the work happens. There is never a charge to you for using the referral line.
Fast response, local dispatch
Your call goes to an independent crew that already works close to you, not one driving in from far across the region. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
The contractors in our network are licensed and insured independent businesses that handle fire and smoke damage regularly. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration companies are willing to put their workmanship warranty on paper. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty comes from the contractor, who is responsible for the work they perform.
Insurance-ready documentation
Fire claims live and die on documentation. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet the adjuster on site and walk through the damage with them.
One call covers every phase
Board-up, water extraction, soot cleaning, odor removal, contents and rebuild are often handled by the same contractor, so you are not juggling five phone numbers.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Keep receipts for everything: meals, lodging, clothing and emergency purchases. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
You also have the right to choose your own restoration contractor in most situations. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
When the contractor and the adjuster disagree about scope, the contractor's photos, moisture logs and line-item estimate are what settle it. That is one more reason to work with a crew that documents carefully from day one.
Business owners have a few extra policy details to keep in mind. Business interruption coverage, if you carry it, may replace lost income while you are closed, and it usually depends on proving the restoration timeline. Ask the contractor for dated progress reports you can pass directly to your carrier.
What Callers Say About Their Fire Damage Recovery
These are accounts from people who called the dispatch line and were connected with an independent contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Raleigh County
Our fryer caught and the fire got into the hood. Losing four days of business was painful, but it could have been a lot worse without the crew we got connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. The final invoice matched their estimate.
Marcus T.Restaurant owner, Raleigh County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I honestly did not know where to start. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Raleigh County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Raleigh County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Raleigh County
Fire Damage Questions We Hear Every Day
How fast can a Fire Restoration Company contractor arrive in Raleigh County?
When the situation is urgent, such as an open roof, blown-out windows or standing water, many network contractors can usually reach you within a few hours. Exact timing depends on your location, the time of day, weather and how busy local crews are. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Calling our referral line costs you nothing.
What emergency services are available after a fire?
Typical emergency services are window and door board-up, roof tarping, water extraction, temporary power coordination, HEPA air filtration, and securing the property from weather and intruders. Many crews can also pull out urgent belongings such as medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect callers with independent local contractors, licensed and insured, who carry out the work and are responsible for it. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Call your insurer to open a claim, and ask whether you have Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
It can be removed when the work is done right. Smell returns when its source is left behind, most often in insulation, framing, ducts or belongings. A thorough job removes or cleans those materials, treats the remaining odor with thermal fogging, hydroxyl or ozone, and seals affected framing before rebuilding. Ask the contractor how they handle odor that returns after the job.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department has cleared the home and the damage is limited to one room, you may be able to stay with that area sealed off, but a contractor's assessment is the best way to know. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond those items, hold off. Many items that look ruined, including hard goods, clothing, furniture and even some electronics, can be professionally cleaned. Keep damaged items until the adjuster has seen them or you have photographed them.
How long does fire damage restoration take?
A contained kitchen fire with limited smoke spread is often cleaned and deodorized within a few days to two weeks. Larger losses that need drying, demolition and reconstruction can take several weeks to several months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
In most cases, no. You generally have the right to choose your own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Fire Restoration Company Coverage Throughout Raleigh County
Our dispatch line covers all of Raleigh County, from the county seat and its suburbs to small towns and unincorporated rural areas. Wherever your property sits in the county, the same number connects you with an independent contractor who works in your area.
Rural fires bring their own challenges. Detached garages, workshops and barns often hold fuel, equipment and stored materials that burn hot and leave heavy residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Contractors serving Raleigh County know which jurisdiction handles your permits and inspections, which can save time once the rebuild starts. The cities and zip codes we serve across the county are listed below.
Common fire calls around Raleigh County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
Smoke Damage Spreads Fast. Get Help Today.
Every hour that soot and water sit, the restoration bill grows. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Raleigh County.
