Fire Restoration Company in Dane County County, WI
The fire is out, but the soot, the smell and the water it left behind are only getting started, and you need help today. Call the dispatch line and we will connect you with an independent restoration crew in Dane County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
The Referral Network People Call When the Fire Is Out
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is pick up at any hour, ask the handful of questions that tell us what kind of fire loss you have, and route you to an independent, licensed and insured restoration contractor serving Dane County that has the equipment and the availability to respond.
We say that plainly because it matters, and you deserve to know exactly who you are hiring. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Over the next several days it works into painted drywall and wood finishes, and bare metal begins to pit and corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Mold can begin growing on wet drywall and insulation in as little as 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign anything, ask the contractor directly about their license, insurance certificate and training, and verify them yourself.
Local knowledge matters too. Crews working across Dane County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Fire Restoration Company Services Available in Dane County
Any fire leaves several separate problems behind at the same time: an open, unsecured structure, soot everywhere, odor trapped in the materials, water from the hoses and a rebuild waiting at the end. The contractors we connect you with handle each phase, and many handle all of them start to finish.
24/7 Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Standing water from fire hoses gets extracted with truck-mounted or portable units, and air scrubbers fitted with HEPA filters go in to start pulling fine soot out of the air. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. A pan of oil left on a burner for a few minutes can coat every cabinet, ceiling and window in the house with a sticky, yellow-brown protein film that smells terrible and does not come off with household cleaners. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some can be cleaned and deodorized and some cannot, and a good contractor will tell you which is which instead of throwing everything in a dumpster.
Fire Damage Removal for Businesses
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Commercial jobs usually need after-hours or weekend scheduling, which experienced commercial contractors are used to arranging.
Soot Removal and Surface Cleaning
Soot is not one thing. Hot, fast fires fed by wood and paper produce a dry, powdery soot that streaks the moment you try to wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Getting the soot type right comes first, because the wrong method can set the stain permanently. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly affected paint can often be cleaned and kept, while heavily affected drywall may be cheaper to replace than to clean. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Deodorization and Smoke Odor Removal
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Hot smoke also travels toward cooler areas, so it ends up in closets, cabinets, attics and wall cavities far from where the fire actually burned.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run safely in occupied spaces, or ozone in buildings that are fully vacated. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Air fresheners only cover the smell for a few days, and this process aims to remove it.
Water Damage From Firefighting
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. That water soaks into subfloors, wall cavities and insulation, and it carries soot with it.
The drying side of a fire job follows the same science as any water loss. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. They take daily readings until the materials are back to normal moisture levels. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out and Cleaning
Personal belongings often need more careful handling than the structure itself. When rooms need demolition or heavy cleaning, crews pack out salvageable contents, inventory them with photos and box labels, and move them to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
At the facility, contents get cleaned with equipment most people never see: ultrasonic tanks for hard goods, ozone rooms for odor, and specialist processes for clothing, paper and electronics. Mention photos, documents and heirlooms to the contractor up front so those items get priority. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Fire Damage Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Structural work after a fire usually needs permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
What to Expect From the Fire Restoration Company Process
Every fire is different, but the sequence of work is fairly consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
Call +1-866-484-1409 and a dispatcher asks a few quick questions about where the fire started, whether utilities are on, whether the fire department has cleared the building and whether there is standing water. Then we connect you with an available independent contractor serving Dane County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project manager walks every room, tests surfaces to identify soot types, takes moisture readings and checks how far smoke traveled. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Crews remove charred materials, HEPA-vacuum loose soot, clean each surface with the right method for its residue, and run drying equipment until readings return to normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Fire Restoration Company
After a fire, most people have never hired a restoration contractor before and do not know what good looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
After inspecting the damage, the contractor puts the estimate in writing before any major work starts. No surprise line items appear at the end, and any change in scope gets approved by you first. Our referral service itself is free to you.
Fast response, local dispatch
Your call goes to an independent crew that already works close to you, not one driving in from far across the region. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty comes from the contractor, who is responsible for the work they perform.
Insurance-ready documentation
Fire claims live and die on documentation. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
Board-up, water extraction, soot cleaning, odor removal, contents and rebuild are often handled by the same contractor, so you are not juggling five phone numbers.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Save every receipt, from hotel nights to meals to replacement clothing. Hold onto damaged items until the adjuster sees them, or at least until you have photographed them in detail.
You also have the right to choose your own restoration contractor in most situations. Your carrier may suggest a preferred vendor, which can be fine, but you are usually not obligated to use that company. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Commercial policies add a few wrinkles worth knowing about. Business interruption coverage, if you carry it, may replace lost income while you are closed, and it usually depends on proving the restoration timeline. Ask the contractor for dated progress reports you can hand straight to your insurer.
What Callers Say About Their Fire Damage Recovery
Here is what a few callers shared after being connected with an independent restoration contractor.
I called at about 11 at night after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. Within ten minutes of calling, the dispatcher had me on the phone with a restoration company. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Dane County
Our fryer caught and the fire got into the hood. Losing four days of business was painful, but it could have been a lot worse without the crew we got connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. The final invoice matched their estimate.
Marcus T.Restaurant owner, Dane County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor explained what a puffback is, cleaned the ducts first so we would not keep blowing soot around, and then went room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Dane County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Dane County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Dane County
Answers to Common Fire Damage Questions
How fast can a Fire Restoration Company contractor arrive in Dane County?
For urgent situations like an open roof, broken windows or standing water, many independent contractors in our network can be on site within a few hours of your call. Exact timing depends on your location, the time of day, weather and how busy local crews are. The dispatcher will tell you straight what to expect instead of promising a time that cannot be met.
Do you provide upfront pricing?
Yes. The contractor we connect you with inspects the damage and gives you a written estimate before major work begins. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Using our referral line is always free.
What emergency services are available after a fire?
Emergency services include board-up of broken windows and doors, roof tarping, water extraction, temporary power coordination, HEPA air scrubbing, and securing the property against weather, theft and vandalism. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Most standard homeowners policies cover sudden, accidental fire damage, including smoke and firefighting water, but coverage depends on your specific policy and deductible. Open a claim with your carrier right away and ask about Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Smell returns when its source is left behind, most often in insulation, framing, ducts or belongings. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. Ask the contractor how they handle odor that returns after the job.
Is it safe to stay in my home after a small fire?
Even small fires release fine particles and chemical residues that can irritate lungs, especially for children, older adults, people with asthma and pets. If the fire department clears the home and the damage is limited to one room, staying may be possible with that area closed off, but a professional assessment is the safest way to decide. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Discard any food, medicine or cosmetics exposed to heat, smoke or water, along with refrigerated food if the power went out. Beyond those items, hold off. A lot of things that look ruined, from dishes and clothing to furniture and some electronics, respond well to professional cleaning. Keep damaged items until the adjuster has seen them or you have photographed them.
How long does fire damage restoration take?
A contained kitchen fire with limited smoke spread is often cleaned and deodorized within a few days to two weeks. Bigger losses involving drying, demolition and rebuilding can run several weeks to a few months, depending on permits, materials and insurance approvals. The contractor should give you a realistic timeline with the written scope.
Do I have to use the contractor my insurance company recommends?
Usually not. Most policyholders can choose their own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Review your policy wording and tell your adjuster which contractor you picked so they can coordinate.
Serving All of Dane County With Fire Restoration Company
Our dispatch line covers all of Dane County, from the county seat and its suburbs to small towns and unincorporated rural areas. No matter where in the county you are, one phone number connects you with an independent contractor who works nearby.
Rural fires bring their own challenges. Detached garages, workshops and barns often hold fuel, equipment and stored materials that burn hot and leave heavy residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. You will find the cities and zip codes we serve throughout the county listed below.
Common fire calls around Dane County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
Smoke Damage Spreads Fast. Get Help Today.
Every hour that soot and water sit, the restoration bill grows. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Dane County.
