Fire Damage Restoration in Silver Bow County County, MT
The fire is out, but the soot, the smell and the water it left behind are only getting started, and you need help today. Call the dispatch line and we will connect you with an independent restoration crew in Silver Bow County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Silver Bow County and can actually get there.
We say that plainly because it matters, and you deserve to know exactly who you are hiring. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Over the next several days it works into painted drywall and wood finishes, and bare metal begins to pit and corrode. Add the water a fire crew used to knock the fire down, and a wet-structure problem is building underneath the smoke damage. Wet drywall, subfloor and insulation can start growing mold within 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. When you call, a real person asks where the fire started, whether the power is on, whether the structure has been cleared for entry and whether there is standing water. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors in the network generally do fire and smoke restoration as a core part of their business. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign anything, ask the contractor directly about their license, insurance certificate and training, and verify them yourself.
Being local makes a real difference. Crews working across Silver Bow County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Fire Damage Restoration Services Available in Silver Bow County
A fire loss is really four or five different problems at once: an unsecured structure, soot on every surface, smoke odor in the building materials, water from firefighting and, eventually, a rebuild. The contractors we connect you with handle each phase, and many handle all of them start to finish.
24/7 Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Truck-mounted or portable extractors pull up the water left by the hoses, and HEPA air scrubbers start capturing the fine soot still floating through the rooms. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Residential Fire Damage Removal
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each one leaves a different kind of residue and needs a different cleaning approach.
Residential crews work room by room: removing charred materials, HEPA-vacuuming loose soot before anyone touches it with a wet rag, cleaning walls and ceilings with dry chemical sponges, then wet-cleaning with degreasers matched to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Fire Damage Removal for Businesses
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke reaching electronics, server rooms and paper records. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Professional Soot Removal and Surface Cleaning
Soot is not one thing. Hot, fast fires fed by wood and paper produce a dry, powdery soot that streaks the moment you try to wipe it. Low-oxygen fires that smolder through plastics, carpet and foam cushions leave wet soot, thick and sticky with a sharp chemical smell. Kitchen fires leave protein residue. Then there is the furnace puffback, where a misfiring oil burner blows fuel-oil soot through the ducts and into every room of the house.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly affected paint can often be cleaned and kept, while heavily affected drywall may be cheaper to replace than to clean. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Smoke Odor Removal and Deodorization
Cleaning what you can see does not remove what you can smell. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Hot smoke also travels toward cooler areas, so it ends up in closets, cabinets, attics and wall cavities far from where the fire actually burned.
Effective deodorization works in layers. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Framing and subfloor that still hold odor after cleaning are usually sealed with a shellac-based odor-blocking primer before new drywall goes up. Sprays and plug-ins just mask the smell for a few days, which is why a layered process matters.
Water Damage From Firefighting
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. That water soaks into subfloors, wall cavities and insulation, and it carries soot with it.
The drying side of a fire job follows the same science as any water loss. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. Readings get logged every day until materials reach a dry standard. Rushing or skipping this step is how a fire claim turns into a mold claim six weeks later.
Contents Pack-Out and Cleaning
Personal belongings often need more careful handling than the structure itself. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Tell the contractor about family photos, important papers and heirlooms before work starts so they get handled first. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Structural Repair and Reconstruction
Once the property is cleaned, dried and deodorized, the rebuild begins. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. A lot of restoration contractors take the job from mitigation through the final coat of paint, so you are not starting from scratch with a new company mid-project.
Structural work after a fire usually needs permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
What to Expect From the Fire Damage Restoration Process
Every fire is different, but the sequence of work is fairly consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
Call +1-866-484-1409 and a dispatcher asks a few quick questions about where the fire started, whether utilities are on, whether the fire department has cleared the building and whether there is standing water. Then we connect you with an available independent contractor serving Silver Bow County.
Arrival and safety check
On arrival, the crew checks that the structure is safe, then photographs and documents every room before moving anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project lead walks the whole property, tests surfaces to identify the soot, takes moisture readings and traces how far the smoke spread. You get a written scope and estimate before major work starts, often in the same Xactimate format adjusters use.
Mitigation, cleaning and drying
Charred materials come out, loose soot is HEPA-vacuumed, surfaces are cleaned with methods matched to the residue, and drying equipment runs until moisture readings come back normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. HVAC ducts are cleaned so the system does not redistribute soot the first time it runs.
Rebuild and final walkthrough
Repairs and reconstruction bring the property back to pre-loss condition, followed by a final walkthrough with you to confirm everything on the scope was completed.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Property Owners Choose Re Fire Me for Fire Damage Restoration
After a fire, most people have never hired a restoration contractor before and do not know what good looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
The contractors we connect you with provide a written estimate after they inspect the damage, before major work begins. No surprise line items appear at the end, and any change in scope gets approved by you first. Our referral service itself is free to you.
Fast response, local dispatch
We route your call to an independent crew already working near you, not one driving in from hours away. On active emergencies like an open roof or broken-out windows, many contractors can be on site within hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
The contractors in our network are licensed and insured independent businesses that handle fire and smoke damage regularly. Ask for their license and certificate of insurance and verify them yourself, which is good practice with any contractor and something the good ones expect.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty comes from the contractor, who is responsible for the work they perform.
Insurance-ready documentation
Documentation can make or break a fire claim. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet the adjuster on site and walk through the damage with them.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
How Insurance Usually Works After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. What is covered depends on your exact policy, so check your declarations page and ask your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the loss to your insurer as soon as possible and ask whether your policy includes Additional Living Expenses (ALE), which can cover a hotel or rental if the home is not livable. Save every receipt, from hotel nights to meals to replacement clothing. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
In most cases you are free to choose your own restoration contractor. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read any work authorization carefully, and be cautious about signing an assignment of benefits without understanding exactly what rights you are handing over.
When the contractor and the adjuster disagree about scope, the contractor's photos, moisture logs and line-item estimate are what settle it. That is one more reason to work with a crew that documents carefully from day one.
Business owners have a few extra policy details to keep in mind. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can hand straight to your insurer.
What Callers Say About Their Fire Damage Recovery
Here is what a few callers shared after being connected with an independent restoration contractor.
I called at about 11 at night after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Silver Bow County
Our fryer caught and the fire got into the hood. Losing four days of business was painful, but it could have been a lot worse without the crew we got connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. Their estimate matched the final invoice.
Marcus T.Restaurant owner, Silver Bow County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I honestly did not know where to start. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Silver Bow County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Silver Bow County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. The contractor kept detailed notes on each unit and gave me separate documentation for each claim. Communication was excellent from start to finish.
Robert M.Property manager, Silver Bow County
Fire Damage Questions We Hear Every Day
How fast can a Fire Damage Restoration contractor arrive in Silver Bow County?
When the situation is urgent, such as an open roof, blown-out windows or standing water, many network contractors can usually reach you within a few hours. Exact timing depends on your location, the time of day, weather and how busy local crews are. The dispatcher will tell you straight what to expect instead of promising a time that cannot be met.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Using our referral line is always free.
What emergency services are available after a fire?
Emergency services include board-up of broken windows and doors, roof tarping, water extraction, temporary power coordination, HEPA air scrubbing, and securing the property against weather, theft and vandalism. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect callers with independent local contractors, licensed and insured, who carry out the work and are responsible for it. We recommend verifying any contractor's license and insurance before you authorize work.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Call your insurer to open a claim, and ask whether you have Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
It can be removed when the work is done right. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department has cleared the home and the damage is limited to one room, you may be able to stay with that area sealed off, but a contractor's assessment is the best way to know. If there is a lingering smell throughout the house, staying elsewhere for a few days is usually the safer choice.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond that, wait. Many items that look ruined, including hard goods, clothing, furniture and even some electronics, can be professionally cleaned. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A small kitchen fire with limited smoke spread can often be cleaned and deodorized in a few days to two weeks. Bigger losses involving drying, demolition and rebuilding can run several weeks to a few months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
In most cases, no. You generally have the right to choose your own restoration contractor. Your insurer's preferred vendor may be a fine option, but the decision is yours. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Serving All of Silver Bow County With Fire Damage Restoration
Our dispatch line covers all of Silver Bow County, from the county seat and its suburbs to small towns and unincorporated rural areas. Wherever your property sits in the county, the same number connects you with an independent contractor who works in your area.
Fires on rural properties come with a different set of problems. Outbuildings like garages, workshops and barns tend to store fuel, tools and equipment that burn hot and leave thick residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. The cities and zip codes we serve across the county are listed below.
Common fire calls around Silver Bow County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
The Clock Started the Moment the Fire Went Out.
Every hour that soot and water sit, the restoration bill grows. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Silver Bow County.
