Fire Damage Restoration in Leon County County, TX
The fire trucks have pulled away, the smoke is still hanging in the rooms, and you need a qualified crew on site today. One call connects you with an independent, licensed and insured fire damage contractor in Leon County who can secure the property, start soot and water mitigation, and put an honest scope of work in writing.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Leon County and can actually get there.
We say that plainly because it matters, and you deserve to know exactly who you are hiring. The contractor you speak with is an independent business. They carry their own license and liability coverage, write their own estimates and stand behind their own workmanship. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. Within the first few hours it starts to yellow plastics, discolor grout and tarnish bathroom fixtures. Over the next several days it works into painted drywall and wood finishes, and bare metal begins to pit and corrode. Add the water a fire crew used to knock the fire down, and a wet-structure problem is building underneath the smoke damage. Mold can begin growing on wet drywall and insulation in as little as 24 to 48 hours. Every hour you wait adds cost to the job.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign anything, ask the contractor directly about their license, insurance certificate and training, and verify them yourself.
Being local makes a real difference. Crews working across Leon County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know which jurisdiction issues permits for your address, whether that is a city office or the county building department, and how to plan around it.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Fire Damage Restoration Services Available in Leon County
A fire loss is really four or five different problems at once: an unsecured structure, soot on every surface, smoke odor in the building materials, water from firefighting and, eventually, a rebuild. The contractors we connect you with cover every phase, and plenty of them take a job all the way from board-up to final paint.
Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Truck-mounted or portable extractors pull up the water left by the hoses, and HEPA air scrubbers start capturing the fine soot still floating through the rooms. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. A pan of oil left on a burner for a few minutes can coat every cabinet, ceiling and window in the house with a sticky, yellow-brown protein film that smells terrible and does not come off with household cleaners. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each one leaves a different kind of residue and needs a different cleaning approach.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some can be cleaned and deodorized and some cannot, and a good contractor will tell you which is which instead of throwing everything in a dumpster.
Commercial Fire Damage Removal
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews plan the job around getting you open again, which often means sealing off the affected area with poly sheeting and negative air machines so the unaffected parts of the building can keep operating.
Restaurant fires are their own category. Grease fires in a hood system leave heavy, oily residue in the ductwork, on stainless steel and inside walk-in coolers, and the health department will want to see the kitchen properly cleaned before reopening. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Commercial jobs usually need after-hours or weekend scheduling, which experienced commercial contractors are used to arranging.
Soot Removal and Surface Cleaning
Soot is not one thing. Hot, fast fires fed by wood and paper produce a dry, powdery soot that streaks the moment you try to wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Getting the soot type right comes first, because the wrong method can set the stain permanently. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly affected paint can often be cleaned and kept, while heavily affected drywall may be cheaper to replace than to clean. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Deodorization and Smoke Odor Removal
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Because hot smoke moves toward cooler spaces, it settles inside closets, attics, cabinets and wall cavities well away from the fire itself.
Effective deodorization works in layers. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Sprays and plug-ins just mask the smell for a few days, which is why a layered process matters.
Firefighting Water Extraction and Drying
People are often surprised that the water does as much damage as the fire. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. That water soaks into subfloors, wall cavities and insulation, and it carries soot with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. Readings get logged every day until materials reach a dry standard. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out and Cleaning
Personal belongings often need more careful handling than the structure itself. When rooms need demolition or heavy cleaning, crews pack out salvageable contents, inventory them with photos and box labels, and move them to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
At the facility, contents get cleaned with equipment most people never see: ultrasonic tanks for hard goods, ozone rooms for odor, and specialist processes for clothing, paper and electronics. Mention photos, documents and heirlooms to the contractor up front so those items get priority. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Structural Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
How a Fire Damage Restoration Job Typically Runs
No two fires look the same, but the order of operations on a professional job is pretty consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you directly with an available independent contractor that serves Leon County.
Arrival and safety check
On arrival, the crew checks that the structure is safe, then photographs and documents every room before moving anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project lead walks the whole property, tests surfaces to identify the soot, takes moisture readings and traces how far the smoke spread. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Charred materials come out, loose soot is HEPA-vacuumed, surfaces are cleaned with methods matched to the residue, and drying equipment runs until moisture readings come back normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Repairs and reconstruction bring the property back to pre-loss condition, followed by a final walkthrough with you to confirm everything on the scope was completed.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Property Owners Choose Re Fire Me for Fire Damage Restoration
After a fire, most people have never hired a restoration contractor before and do not know what good looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
After inspecting the damage, the contractor puts the estimate in writing before any major work starts. Nothing gets added at the end without your sign-off, and scope changes are approved before the work happens. Our referral service itself is free to you.
Fast response, local dispatch
Your call goes to an independent crew that already works close to you, not one driving in from far across the region. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
The contractors in our network are licensed and insured independent businesses that handle fire and smoke damage regularly. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask for it before you sign, along with what happens if smoke odor returns after the job is finished. Any warranty comes from the contractor, who is responsible for the work they perform.
Insurance-ready documentation
Fire claims live and die on documentation. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
Board-up, water extraction, soot cleaning, odor removal, contents and rebuild are often handled by the same contractor, so you are not juggling five phone numbers.
How Insurance Usually Works After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. What is covered depends on your exact policy, so check your declarations page and ask your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Keep receipts for everything: meals, lodging, clothing and emergency purchases. Hold onto damaged items until the adjuster sees them, or at least until you have photographed them in detail.
You also have the right to choose your own restoration contractor in most situations. Your carrier may suggest a preferred vendor, which can be fine, but you are usually not obligated to use that company. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Commercial policies add a few wrinkles worth knowing about. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can hand straight to your insurer.
Real Stories From People Who Called After a Fire
These are accounts from people who called the dispatch line and were connected with an independent contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. Within ten minutes of calling, the dispatcher had me on the phone with a restoration company. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Leon County
Our fryer caught and the fire got into the hood. We lost four days of business, which hurt, but it would have been much worse without the crew we were connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. Their estimate matched the final invoice.
Marcus T.Restaurant owner, Leon County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I honestly did not know where to start. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Leon County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were straightforward about what they could save and what they couldn't. The smell is completely gone.
James and Priya S.Homeowners, Leon County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed a contractor who could juggle the tenants, the owner's insurance and several renters policies at once. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Leon County
Answers to Common Fire Damage Questions
How fast can a Fire Damage Restoration contractor arrive in Leon County?
For urgent situations like an open roof, broken windows or standing water, many independent contractors in our network can be on site within a few hours of your call. Exact timing depends on your location, the time of day, weather and how busy local crews are. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Calling our referral line costs you nothing.
What emergency services are available after a fire?
Emergency services include board-up of broken windows and doors, roof tarping, water extraction, temporary power coordination, HEPA air scrubbing, and securing the property against weather, theft and vandalism. Many crews can also pull out urgent belongings such as medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me operates as a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. We recommend verifying any contractor's license and insurance before you authorize work.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Call your insurer to open a claim, and ask whether you have Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Smell returns when its source is left behind, most often in insulation, framing, ducts or belongings. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. Ask the contractor how they handle odor that returns after the job.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department has cleared the home and the damage is limited to one room, you may be able to stay with that area sealed off, but a contractor's assessment is the best way to know. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Discard any food, medicine or cosmetics exposed to heat, smoke or water, along with refrigerated food if the power went out. Beyond that, wait. Many items that look ruined, including hard goods, clothing, furniture and even some electronics, can be professionally cleaned. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A contained kitchen fire with limited smoke spread is often cleaned and deodorized within a few days to two weeks. Bigger losses involving drying, demolition and rebuilding can run several weeks to a few months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
Usually not. Most policyholders can choose their own restoration contractor. Your insurer's preferred vendor may be a fine option, but the decision is yours. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Serving All of Leon County With Fire Damage Restoration
The dispatch line serves every corner of Leon County, from the larger towns and suburbs out to the small communities and unincorporated land. No matter where in the county you are, one phone number connects you with an independent contractor who works nearby.
Rural fires bring their own challenges. Detached garages, workshops and barns often hold fuel, equipment and stored materials that burn hot and leave heavy residue. Homes on private wells may need the water system inspected if it was used during firefighting, and longer distances make fast board-up all the more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. The cities and zip codes we serve across the county are listed below.
Common fire calls around Leon County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
Smoke Damage Spreads Fast. Get Help Today.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Leon County.
