Fire Damage Removal in Brentwood, TN
The fire is out, but the soot, the smell and the water it left behind are only getting started, and you need help today. Call the dispatch line and we will connect you with an independent restoration crew in Brentwood, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We do not swing the hammers or run the dehumidifiers ourselves. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Brentwood and can actually get there.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our job is to shorten the distance between the fire and the first qualified person walking through your door.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Over the next several days it works into painted drywall and wood finishes, and bare metal begins to pit and corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Mold can begin growing on wet drywall and insulation in as little as 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. A big share of our calls come in overnight, often within an hour of the fire department leaving, and the line is staffed for exactly that. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign anything, ask the contractor directly about their license, insurance certificate and training, and verify them yourself.
Local knowledge matters too. A crew based near Brentwood knows the housing stock, from older homes with plaster walls and original hardwood to newer builds with open floor plans that let smoke travel from one end of the house to the other in minutes. They also know which building department handles permits and how long inspections usually take, which keeps a rebuild moving.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Core Fire Damage Removal Services Available in Brentwood
Any fire leaves several separate problems behind at the same time: an open, unsecured structure, soot everywhere, odor trapped in the materials, water from the hoses and a rebuild waiting at the end. The contractors we connect you with handle each phase, and many handle all of them start to finish.
Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. A responding crew will typically confirm the structure is safe to enter, coordinate with the utility company on power and gas, and board up windows and doors that firefighters had to force or vent. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Truck-mounted or portable extractors pull up the water left by the hoses, and HEPA air scrubbers start capturing the fine soot still floating through the rooms. It is not glamorous work, yet it protects what survived, and most policies require reasonable steps like these to keep the loss from getting worse.
Residential Fire Damage Removal
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
Residential crews work room by room: removing charred materials, HEPA-vacuuming loose soot before anyone touches it with a wet rag, cleaning walls and ceilings with dry chemical sponges, then wet-cleaning with degreasers matched to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Fire Damage Removal for Businesses
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: lost revenue for every day the doors stay closed. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. Grease fires in a hood system leave heavy, oily residue in the ductwork, on stainless steel and inside walk-in coolers, and the health department will want to see the kitchen properly cleaned before reopening. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Soot Removal and Surface Cleaning
Soot is not one thing. Hot, fast fires fed by wood and paper produce a dry, powdery soot that streaks the moment you try to wipe it. Low-oxygen fires that smolder through plastics, carpet and foam cushions leave wet soot, thick and sticky with a sharp chemical smell. Kitchen fires leave protein residue. Then there is the furnace puffback, where a misfiring oil burner blows fuel-oil soot through the ducts and into every room of the house.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly smoked paint can usually be saved with cleaning, while drywall saturated with soot is often cheaper to cut out and replace. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Deodorization and Smoke Odor Removal
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Because hot smoke moves toward cooler spaces, it settles inside closets, attics, cabinets and wall cavities well away from the fire itself.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Air fresheners only cover the smell for a few days, and this process aims to remove it.
Firefighting Water Extraction and Drying
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. That water soaks into subfloors, wall cavities and insulation, and it carries soot with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. Readings get logged every day until materials reach a dry standard. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out, Inventory and Cleaning
Your belongings often need more care than the building. When rooms need demolition or heavy cleaning, crews pack out salvageable contents, inventory them with photos and box labels, and move them to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Tell the contractor about family photos, important papers and heirlooms before work starts so they get handled first. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Structural Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
What to Expect From the Fire Damage Removal Process
No two fires look the same, but the order of operations on a professional job is pretty consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you with an available independent contractor serving Brentwood.
Arrival and safety check
On arrival, the crew checks that the structure is safe, then photographs and documents every room before moving anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project lead walks the whole property, tests surfaces to identify the soot, takes moisture readings and traces how far the smoke spread. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Crews remove charred materials, HEPA-vacuum loose soot, clean each surface with the right method for its residue, and run drying equipment until readings return to normal.
Deodorization and HVAC cleaning
Once the cleaning is done, the crew treats lingering odor with thermal fogging, hydroxyl or ozone, and seals any framing that still holds smoke. HVAC ducts are cleaned so the system does not redistribute soot the first time it runs.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Fire Damage Removal
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
After inspecting the damage, the contractor puts the estimate in writing before any major work starts. No surprise line items appear at the end, and any change in scope gets approved by you first. There is never a charge to you for using the referral line.
Fast response, local dispatch
Your call goes to an independent crew that already works close to you, not one driving in from far across the region. On active emergencies like an open roof or broken-out windows, many contractors can be on site within hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
The contractors in our network are licensed and insured independent businesses that handle fire and smoke damage regularly. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration companies are willing to put their workmanship warranty on paper. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Fire claims live and die on documentation. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Save every receipt, from hotel nights to meals to replacement clothing. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
In most cases you are free to choose your own restoration contractor. Your carrier may suggest a preferred vendor, which can be fine, but you are usually not obligated to use that company. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Commercial policies add a few wrinkles worth knowing about. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can hand straight to your insurer.
What Callers Say About Their Fire Damage Recovery
Here is what a few callers shared after being connected with an independent restoration contractor.
I called at about 11 at night after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Brentwood
Our fryer caught and the fire got into the hood. We lost four days of business, which hurt, but it would have been much worse without the crew we were connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. The final invoice matched their estimate.
Marcus T.Restaurant owner, Brentwood
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Brentwood
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. The crew boarded up the garage the same day, pulled out the attic insulation that was holding the smell, and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Brentwood
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. The contractor kept detailed notes on each unit and gave me separate documentation for each claim. Communication was excellent from start to finish.
Robert M.Property manager, Brentwood
Fire Damage Questions We Hear Every Day
How fast can a Fire Damage Removal contractor arrive in Brentwood?
When the situation is urgent, such as an open roof, blown-out windows or standing water, many network contractors can usually reach you within a few hours. Real arrival times vary with distance, time of day, weather and local demand. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. The contractor we connect you with inspects the damage and gives you a written estimate before major work begins. Emergency measures such as board-up or water extraction may begin immediately to stop further damage, and the contractor should explain how those are billed first. Using our referral line is always free.
What emergency services are available after a fire?
Emergency services include board-up of broken windows and doors, roof tarping, water extraction, temporary power coordination, HEPA air scrubbing, and securing the property against weather, theft and vandalism. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me operates as a free referral service. We connect callers with independent local contractors, licensed and insured, who carry out the work and are responsible for it. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Most standard homeowners policies cover sudden, accidental fire damage, including smoke and firefighting water, but coverage depends on your specific policy and deductible. Open a claim with your carrier right away and ask about Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. Ask the contractor how they handle odor that returns after the job.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department clears the home and the damage is limited to one room, staying may be possible with that area closed off, but a professional assessment is the safest way to decide. If there is a lingering smell throughout the house, staying elsewhere for a few days is usually the safer choice.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond that, wait. A lot of things that look ruined, from dishes and clothing to furniture and some electronics, respond well to professional cleaning. Keep damaged items until the adjuster has seen them or you have photographed them.
How long does fire damage restoration take?
A contained kitchen fire with limited smoke spread is often cleaned and deodorized within a few days to two weeks. Larger losses that need drying, demolition and reconstruction can take several weeks to several months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
In most cases, no. You generally have the right to choose your own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Review your policy wording and tell your adjuster which contractor you picked so they can coordinate.
Fire Damage Removal Coverage Across Brentwood
The dispatch line serves all of Brentwood, from older neighborhoods with plaster walls and original hardwood to new subdivisions, apartment communities and busy commercial strips. Homeowner, renter, property manager or business owner, the same phone number connects you with an independent contractor working in your part of the city.
In apartments and condos, smoke rarely stays in one unit. It travels through shared walls, plumbing chases and ventilation shafts, often reaching hallways and neighboring units. Contractors who handle multifamily losses know how to coordinate with property managers, HOAs and multiple insurance policies.
Coverage extends into the communities surrounding Brentwood, so call even if you are just outside the city limits. You will find the zip codes and nearby cities we serve listed below.
Common fire calls around Brentwood
- Kitchen and grease fires
- Dryer vent and laundry room fires
- Electrical and wiring fires
- Lithium battery and garage fires
- Furnace puffbacks
- Commercial kitchen and hood fires
The Clock Started the Moment the Fire Went Out.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Brentwood.
