Fire And Water Damage Restoration in Alice, TX
The fire was in the kitchen, but the water from the hoses is now in the basement, the subfloor and every wall cavity on the first floor. One call connects you with an independent, licensed and insured fire and water restoration contractor in Alice that can extract, dry and clean in the right order.
- Water extraction & structural drying
- Moisture mapping
- Soot & smoke cleanup
- Licensed & insured independent pros
Handling Fire and Water Damage Together in Alice
Almost every fire loss is also a water loss. Hoses move huge volumes of water, sprinkler heads open and heat can burst supply lines. Because the water picks up soot on its way, it carries contamination into subfloors, wall cavities and insulation.
The order of operations matters. Extraction and drying have to start fast, often before soot cleaning, because mold can begin within 24 to 48 hours on wet drywall and wood. But running air movers in a sooty room can blow residue everywhere, so crews contain the area, HEPA-vacuum loose soot and use air scrubbers alongside drying equipment.
The drying itself follows psychrometrics, the science of air, temperature and moisture. Technicians map moisture, place air movers and LGR dehumidifiers, and take daily readings until materials reach dry standard.
Re Fire Me is a free referral service, not the contractor. We connect Alice callers with independent, licensed and insured contractors who handle both fire and water damage, many trained to IICRC S500 and S700.
Where firefighting water hides
- Under hardwood, laminate and tile
- Inside wall cavities and insulation
- In ceiling drywall below upper floors
- Basements and crawlspaces
- Behind cabinets and baseboards
Why Choose Our Specialized Fire And Water Damage Restoration in Alice, TX
You need a contractor fluent in both fire and water work. This is what independent contractors in the Alice network bring to combined losses.
Licensed & insured contractors
Calls go to independent, licensed and insured businesses that do both water mitigation and fire restoration.
Upfront written pricing
Before major work begins, you receive a written scope for extraction, drying, equipment, soot cleaning and repairs.
Rapid local dispatch
Since drying cannot wait, local crews often start extraction within hours.
Drying & detection equipment
Truck-mount extractors, LGR dehumidifiers, air movers, wall-cavity drying systems, moisture meters, thermal cameras and HEPA scrubbers.
Combined Fire and Water Solutions Around Alice
These are the core steps on a combined fire and water loss.
Water Extraction
Standing water is removed with submersible pumps and truck-mounted extractors, including from carpet and pad. The faster the extraction, the shorter the drying.
Moisture Mapping
Moisture meters and thermal imaging trace water into walls, under floors and into ceilings below. The map sets where drying equipment goes and what has to be removed.
Structural Drying
Equipment placement follows psychrometric readings, and wall cavities are dried in place when possible. Readings are logged daily.
Soot Cleanup in Wet Areas
Loose soot is HEPA-vacuumed before air movers run, and residue carried by water is cleaned from floors and lower walls.
Mold Prevention
Fast drying, removal of materials that will not dry in time and antimicrobial application help prevent mold.
Repairs After Drying
After everything hits dry standard, removed materials are replaced and finishes restored.
Understanding the Water Left Behind After a Fire
Water restoration professionals classify water by contamination level. Category 1 is clean water from a supply line, Category 2 has some contamination, and Category 3 is grossly contaminated water such as sewage or floodwater.
Hose water may start clean, but it collects soot, ash, chemicals and debris as it flows through the structure. Depending on what it touched and how long it sat, it may be treated as Category 2 or even Category 3, which affects what materials can be dried in place and what has to be removed.
That is why fire and water losses need a contractor who understands both. Carpet pad soaked with sooty water is usually removed. Drywall wicking dirty water above a certain height may be cut out. Hard surfaces get cleaned and treated before drying finishes.
Drying logs are one of the most useful documents on a fire and water job. Each day, technicians record moisture readings at marked points, along with temperature and humidity inside and outside the drying area. Those numbers show whether drying is progressing and when materials reach dry standard. Adjusters rely on them to approve equipment charges, and you can rely on them to know the structure is actually dry before walls are closed up and finishes go back on.
Fire and Water Situations We Hear About Most
Upstairs fire, downstairs water
The fire is on the second floor, but the hose water comes through the ceilings below. The first floor needs moisture mapping, drying and ceiling repairs even though it never saw a flame.
Sprinkler discharge in a business
A small fire triggers sprinkler heads in an office or warehouse. The fire is minor, but water spreads across carpet, inventory and lower walls, and drying has to start immediately to reopen quickly.
Pipes burst by heat
Heat from a fire can melt or burst supply lines inside walls, so water keeps flowing after the fire is out. Shutting off the water, finding the break and drying the cavity become urgent.
Crawlspace and basement flooding
Water collects in crawlspaces and basements where it is out of sight. Extraction, dehumidification and moisture monitoring there prevent mold and wood rot under the house.
Hardwood floors soaked by hoses
Hardwood floors that took on firefighting water can cup and buckle. Specialized floor drying mats and dehumidifiers can sometimes save them if drying starts quickly, while waiting usually means replacement.
How Fire and Water Restoration Works in Alice
Call Dispatch
Call +1-866-484-1409 and describe where the water is and where the fire started. We connect you with an independent contractor near Alice.
Rapid Mobile Arrival
On arrival, the crew extracts water and sets up containment and HEPA scrubbers.
Expert Assessment & Quote
After mapping moisture and soot, the lead provides a written scope with drying time and repairs.
Resolution & Final Walkthrough
Drying, cleaning and repairs are completed in order, with moisture logs and a final walkthrough.
What Alice Callers Say About Fire and Water Restoration
Upstairs had the fire, downstairs got all the water. The crew mapped the moisture with a thermal camera and found water inside walls I never would have checked.
Ellen W.Homeowner, Alice
Our sprinkler system went off during a small fire in our warehouse office. They dried the concrete and racks, cleaned the soot and had us operating again in a week.
Frank Z.Business owner, Alice
We got daily moisture readings, and the adjuster accepted the drying logs as submitted. No mold, no smell.
Angela and Ray T.Homeowners, Alice
They explained why the carpet could be saved but the pad had to go. The drying took four days and the house smells normal again.
Josh M.Homeowner, Alice
Common Fire and Water Questions in Alice
Why is there so much water damage after a fire?
Hoses, sprinklers and heat-burst pipes all add water. That water soaks into floors, walls and ceilings far from where the fire burned.
Should drying or soot cleaning happen first?
Usually, extraction and drying start first because mold can begin within 24 to 48 hours. Crews HEPA-vacuum loose soot and run air scrubbers so the drying equipment does not spread residue.
How long does it take to dry a home after a fire?
With the right equipment, most buildings dry in three to five days. Hardwood, plaster and concrete can take longer.
Can firefighting water cause mold?
It can. Mold may start on wet drywall, wood and insulation within a day or two. Quick extraction and structured drying are the best defense.
Is Re Fire Me the restoration contractor?
No, we are a free referral service that connects you with independent, licensed and insured contractors. The contractor performs and is responsible for the work.
Does insurance cover water damage from putting out a fire?
Generally, yes. Water used to extinguish a covered fire is typically part of the fire claim. Check your policy and keep the contractor's drying logs.
Fire and Water Restoration Across Alice
We take calls from Alice and nearby areas around the clock. Contractors handle homes with basements and crawlspaces, multi-story condos, apartments and commercial buildings with sprinkler systems. See nearby cities and zip codes below.
Contractors around Alice handle combined fire and water losses in homes with basements, slab foundations and crawlspaces.
Start Drying Before Mold Starts Growing
Mold can start on wet materials in as little as a day. Call +1-866-484-1409 to connect with an independent fire and water contractor in Alice.
