Fire And Water Damage Restoration in Logan County County, OH
The fire is out, but the soot, the smell and the water it left behind are only getting started, and you need help today. One call connects you with an independent, licensed and insured fire damage contractor in Logan County who can secure the property, start soot and water mitigation, and put an honest scope of work in writing.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Logan County and can actually get there.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our job is to shorten the distance between the fire and the first qualified person walking through your door.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Left alone for a few days, it bonds with paint and wood finishes, and exposed metal starts to corrode. Add the water a fire crew used to knock the fire down, and a wet-structure problem is building underneath the smoke damage. Mold can begin growing on wet drywall and insulation in as little as 24 to 48 hours. Every hour you wait adds cost to the job.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. A big share of our calls come in overnight, often within an hour of the fire department leaving, and the line is staffed for exactly that. When you call, a real person asks where the fire started, whether the power is on, whether the structure has been cleared for entry and whether there is standing water. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign anything, ask the contractor directly about their license, insurance certificate and training, and verify them yourself.
Local knowledge matters too. Crews working across Logan County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Core Fire And Water Damage Restoration Services Available in Logan County
A fire loss is really four or five different problems at once: an unsecured structure, soot on every surface, smoke odor in the building materials, water from firefighting and, eventually, a rebuild. The contractors we connect you with handle each phase, and many handle all of them start to finish.
Emergency Fire Damage Response
The first visit after a fire is about stopping the damage from spreading. A responding crew will typically confirm the structure is safe to enter, coordinate with the utility company on power and gas, and board up windows and doors that firefighters had to force or vent. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Standing water from fire hoses gets extracted with truck-mounted or portable units, and air scrubbers fitted with HEPA filters go in to start pulling fine soot out of the air. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Commercial Fire Damage Removal
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: lost revenue for every day the doors stay closed. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. Grease fires in a hood system leave heavy, oily residue in the ductwork, on stainless steel and inside walk-in coolers, and the health department will want to see the kitchen properly cleaned before reopening. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Professional Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly smoked paint can usually be saved with cleaning, while drywall saturated with soot is often cheaper to cut out and replace. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Smoke Odor Removal and Deodorization
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Because hot smoke moves toward cooler spaces, it settles inside closets, attics, cabinets and wall cavities well away from the fire itself.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Sprays and plug-ins just mask the smell for a few days, which is why a layered process matters.
Firefighting Water Extraction and Drying
People are often surprised that the water does as much damage as the fire. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. All of it soaks into subfloors, insulation and wall cavities, carrying dissolved soot along with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. They take daily readings until the materials are back to normal moisture levels. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out, Inventory and Cleaning
Personal belongings often need more careful handling than the structure itself. When rooms need demolition or heavy cleaning, crews pack out salvageable contents, inventory them with photos and box labels, and move them to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
At the facility, contents get cleaned with equipment most people never see: ultrasonic tanks for hard goods, ozone rooms for odor, and specialist processes for clothing, paper and electronics. Mention photos, documents and heirlooms to the contractor up front so those items get priority. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Fire Damage Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. A lot of restoration contractors take the job from mitigation through the final coat of paint, so you are not starting from scratch with a new company mid-project.
Structural work after a fire usually needs permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
How a Fire And Water Damage Restoration Job Typically Runs
Every fire is different, but the sequence of work is fairly consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you with an available independent contractor serving Logan County.
Arrival and safety check
On arrival, the crew checks that the structure is safe, then photographs and documents every room before moving anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project manager walks every room, tests surfaces to identify soot types, takes moisture readings and checks how far smoke traveled. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Crews remove charred materials, HEPA-vacuum loose soot, clean each surface with the right method for its residue, and run drying equipment until readings return to normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Property Owners Choose Re Fire Me for Fire And Water Damage Restoration
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
The contractors we connect you with provide a written estimate after they inspect the damage, before major work begins. Nothing gets added at the end without your sign-off, and scope changes are approved before the work happens. There is never a charge to you for using the referral line.
Fast response, local dispatch
We route your call to an independent crew already working near you, not one driving in from hours away. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
The contractors in our network are licensed and insured independent businesses that handle fire and smoke damage regularly. Ask for their license and certificate of insurance and verify them yourself, which is good practice with any contractor and something the good ones expect.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Documentation can make or break a fire claim. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet your adjuster on site and walk the loss together.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden, accidental fire damage, including smoke damage and the water used to put the fire out. What is covered depends on your exact policy, so check your declarations page and ask your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the loss to your insurer as soon as possible and ask whether your policy includes Additional Living Expenses (ALE), which can cover a hotel or rental if the home is not livable. Keep receipts for everything: meals, lodging, clothing and emergency purchases. Hold onto damaged items until the adjuster sees them, or at least until you have photographed them in detail.
You also have the right to choose your own restoration contractor in most situations. Your carrier may suggest a preferred vendor, which can be fine, but you are usually not obligated to use that company. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Business owners have a few extra policy details to keep in mind. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can pass directly to your carrier.
What Callers Say About Their Fire Damage Recovery
Here is what a few callers shared after being connected with an independent restoration contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later there was no sign anything had happened.
Danielle R.Homeowner, Logan County
Our fryer caught and the fire got into the hood. Losing four days of business was painful, but it could have been a lot worse without the crew we got connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. Their estimate matched the final invoice.
Marcus T.Restaurant owner, Logan County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor walked me through what a puffback is, cleaned the ductwork first so the soot would stop circulating, then worked through the house room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Logan County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Logan County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed a contractor who could juggle the tenants, the owner's insurance and several renters policies at once. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Logan County
Fire Damage Questions We Hear Every Day
How fast can a Fire And Water Damage Restoration contractor arrive in Logan County?
For urgent situations like an open roof, broken windows or standing water, many independent contractors in our network can be on site within a few hours of your call. Real arrival times vary with distance, time of day, weather and local demand. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. The contractor we connect you with inspects the damage and gives you a written estimate before major work begins. Emergency measures such as board-up or water extraction may begin immediately to stop further damage, and the contractor should explain how those are billed first. Using our referral line is always free.
What emergency services are available after a fire?
Emergency services include board-up of broken windows and doors, roof tarping, water extraction, temporary power coordination, HEPA air scrubbing, and securing the property against weather, theft and vandalism. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. We recommend verifying any contractor's license and insurance before you authorize work.
Will my homeowners insurance cover fire damage removal?
Most standard homeowners policies cover sudden, accidental fire damage, including smoke and firefighting water, but coverage depends on your specific policy and deductible. Open a claim with your carrier right away and ask about Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even a small fire puts out fine particulates and chemical residue that can irritate airways, particularly for kids, older adults, anyone with asthma, and pets. If the fire department has cleared the home and the damage is limited to one room, you may be able to stay with that area sealed off, but a contractor's assessment is the best way to know. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond that, wait. A lot of things that look ruined, from dishes and clothing to furniture and some electronics, respond well to professional cleaning. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A contained kitchen fire with limited smoke spread is often cleaned and deodorized within a few days to two weeks. Bigger losses involving drying, demolition and rebuilding can run several weeks to a few months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
Usually not. Most policyholders can choose their own restoration contractor. Your insurer's preferred vendor may be a fine option, but the decision is yours. Review your policy wording and tell your adjuster which contractor you picked so they can coordinate.
Fire And Water Damage Restoration Coverage Throughout Logan County
Our dispatch line covers all of Logan County, from the county seat and its suburbs to small towns and unincorporated rural areas. Wherever your property sits in the county, the same number connects you with an independent contractor who works in your area.
Fires on rural properties come with a different set of problems. Outbuildings like garages, workshops and barns tend to store fuel, tools and equipment that burn hot and leave thick residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Local contractors know whether a city or the county handles permits for your property, and that saves time when the rebuild begins. The cities and zip codes we serve across the county are listed below.
Common fire calls around Logan County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
Smoke Damage Spreads Fast. Get Help Today.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Logan County.
