Fire And Water Damage Restoration in Des Plaines, IL
The fire was in the kitchen, but the water from the hoses is now in the basement, the subfloor and every wall cavity on the first floor. Call the dispatch line and we will connect you with a licensed, insured independent contractor near Des Plaines that handles both water drying and soot cleanup together.
- Water extraction & structural drying
- Moisture mapping
- Soot & smoke cleanup
- Licensed & insured independent pros
Handling Fire and Water Damage Together in Des Plaines
Nearly every fire turns into a water job too. A fire hose can move well over a hundred gallons a minute, sprinklers discharge, and heat can burst supply lines. Because the water picks up soot on its way, it carries contamination into subfloors, wall cavities and insulation.
Sequencing is everything on these jobs. Extraction and drying usually come first because mold can start on wet materials in 24 to 48 hours. Yet air movers can spread soot, so crews contain the area, HEPA-vacuum first and run scrubbers alongside the drying gear.
The drying itself follows psychrometrics, the science of air, temperature and moisture. Technicians map moisture, place air movers and LGR dehumidifiers, and take daily readings until materials reach dry standard.
We are a free referral service; the work is done by independent contractors. We connect Des Plaines callers with independent, licensed and insured contractors who handle both fire and water damage, many trained to IICRC S500 and S700.
Where firefighting water hides
- Under hardwood, laminate and tile
- Inside wall cavities and insulation
- In ceiling drywall below upper floors
- Basements and crawlspaces
- Behind cabinets and baseboards
Why Choose Our Specialized Fire And Water Damage Restoration in Des Plaines, IL
Fire and water together demand a contractor who understands both. Here is what the independent contractors we connect you with in Des Plaines bring.
Licensed & insured contractors
Calls go to independent, licensed and insured businesses that do both water mitigation and fire restoration.
Upfront written pricing
You get a written scope covering extraction, drying days, equipment, soot cleaning and repairs before major work starts.
Rapid local dispatch
Drying has to start fast, and crews near Des Plaines can often begin extraction within hours.
Drying & detection equipment
Truck-mounted extractors, LGR dehumidifiers, axial air movers, injectidry systems for wall cavities, moisture meters, thermal cameras and HEPA scrubbers.
Fire and Water Damage Restoration Services in Des Plaines
Combined losses usually involve the following.
Water Extraction
Pumps and truck-mount extractors pull standing water from floors, carpet and pad. Faster extraction means shorter drying times.
Moisture Mapping
Meters and thermal cameras follow water into walls, under floors and through ceilings. That map decides equipment placement and what has to come out.
Structural Drying
Equipment placement follows psychrometric readings, and wall cavities are dried in place when possible. Readings are logged daily.
Soot Cleanup in Wet Areas
HEPA vacuuming happens before air movers start, then water-borne soot is cleaned from floors and lower walls.
Mold Prevention
Fast drying, removal of materials that will not dry in time and antimicrobial application help prevent mold.
Repairs After Drying
After everything hits dry standard, removed materials are replaced and finishes restored.
Understanding the Water Left Behind After a Fire
Restoration pros sort water losses into categories by contamination. Category 1 is clean supply water, Category 2 is somewhat contaminated, and Category 3 is grossly contaminated, like sewage or floodwater.
Firefighting water often starts clean but picks up soot, ash, chemicals and debris as it moves through the building. Depending on what it touched and how long it sat, it may be treated as Category 2 or even Category 3, which affects what materials can be dried in place and what has to be removed.
That is exactly why combined losses need a contractor fluent in both. Sooty, soaked carpet pad typically comes out, contaminated drywall may be cut above the wick line, and hard surfaces are cleaned and treated before drying wraps up.
Drying logs are one of the most useful documents on a fire and water job. Each day, technicians record moisture readings at marked points, along with temperature and humidity inside and outside the drying area. Those numbers show whether drying is progressing and when materials reach dry standard. Adjusters rely on them to approve equipment charges, and you can rely on them to know the structure is actually dry before walls are closed up and finishes go back on.
Fire and Water Situations We Hear About Most
Upstairs fire, downstairs water
The fire is on the second floor, but the hose water comes through the ceilings below. The first floor needs moisture mapping, drying and ceiling repairs even though it never saw a flame.
Sprinkler discharge in a business
A small fire triggers sprinkler heads in an office or warehouse. The fire is minor, but water spreads across carpet, inventory and lower walls, and drying has to start immediately to reopen quickly.
Pipes burst by heat
Heat from a fire can melt or burst supply lines inside walls, so water keeps flowing after the fire is out. Shutting off the water, finding the break and drying the cavity become urgent.
Crawlspace and basement flooding
Water collects in crawlspaces and basements where it is out of sight. Extraction, dehumidification and moisture monitoring there prevent mold and wood rot under the house.
Hardwood floors soaked by hoses
Hardwood floors that took on firefighting water can cup and buckle. Specialized floor drying mats and dehumidifiers can sometimes save them if drying starts quickly, while waiting usually means replacement.
How Fire and Water Restoration Works in Des Plaines
Call Dispatch
Call +1-866-484-1409 and tell the dispatcher where water is standing and where the fire was. We connect you with an independent contractor near Des Plaines.
Rapid Mobile Arrival
The crew arrives, extracts standing water and sets up containment and air scrubbers.
Expert Assessment & Quote
After mapping moisture and soot, the lead provides a written scope with drying time and repairs.
Resolution & Final Walkthrough
Drying, cleaning and repairs are completed in order, with moisture logs and a final walkthrough.
Fire and Water Stories From Des Plaines
Upstairs had the fire, downstairs got all the water. Their thermal camera found water in walls I would never have thought to check.
Ellen W.Homeowner, Des Plaines
A small office fire set off our warehouse sprinklers. They dried the concrete and racks, cleaned the soot and had us operating again in a week.
Frank Z.Business owner, Des Plaines
They gave us daily moisture readings, and the adjuster accepted their drying logs without question. No mold, no smell.
Angela and Ray T.Homeowners, Des Plaines
They explained why the carpet could be saved but the pad had to go. The drying took four days and the house smells normal again.
Josh M.Homeowner, Des Plaines
Fire and Water Damage Questions
Why is there so much water damage after a fire?
Firefighting uses large volumes of water, sprinklers may discharge and heat can burst pipes. That water soaks into floors, walls and ceilings far from where the fire burned.
Should drying or soot cleaning happen first?
Drying generally starts first because mold can develop within a day or two. To avoid spreading soot, crews HEPA-vacuum and run air scrubbers alongside drying.
How long does it take to dry a home after a fire?
With the right equipment, most buildings dry in three to five days. Hardwood, plaster and concrete can take longer.
Can firefighting water cause mold?
Yes. Wet drywall, wood and insulation can support mold growth within 24 to 48 hours if not dried. Fast extraction and professional drying are the best prevention.
Is Re Fire Me the restoration contractor?
No. Re Fire Me is a free referral service connecting you with independent, licensed and insured contractors. The contractor does the work and is responsible for it.
Does insurance cover water damage from putting out a fire?
In most cases. Firefighting water is normally included in the fire claim. Review your policy and keep the drying records.
Fire and Water Coverage in Des Plaines and Nearby
We take calls from Des Plaines and nearby areas around the clock. Contractors work on houses, condos, apartments and sprinklered commercial buildings. See nearby cities and zip codes below.
Contractors around Des Plaines handle combined fire and water losses in homes with basements, slab foundations and crawlspaces.
Start Drying Before Mold Starts Growing
Mold can start on wet materials in as little as a day. Call +1-866-484-1409 to connect with an independent fire and water contractor in Des Plaines.
