Fire And Water Damage Restoration in Blaine County County, MT
The fire trucks have pulled away, the smoke is still hanging in the rooms, and you need a qualified crew on site today. One call connects you with an independent, licensed and insured fire damage contractor in Blaine County who can secure the property, start soot and water mitigation, and put an honest scope of work in writing.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We are not the crew that pulls up with the air scrubbers and the plywood. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Blaine County and can actually get there.
We say that plainly because it matters, and you deserve to know exactly who you are hiring. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Over the next several days it works into painted drywall and wood finishes, and bare metal begins to pit and corrode. Add the water a fire crew used to knock the fire down, and a wet-structure problem is building underneath the smoke damage. Wet drywall, subfloor and insulation can start growing mold within 24 to 48 hours. Every hour you wait adds cost to the job.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. A big share of our calls come in overnight, often within an hour of the fire department leaving, and the line is staffed for exactly that. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors in the network generally do fire and smoke restoration as a core part of their business. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign a work authorization, ask for a copy of the contractor's license and certificate of insurance and confirm both yourself; any reputable restoration company expects that question.
Being local makes a real difference. Crews working across Blaine County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know which jurisdiction issues permits for your address, whether that is a city office or the county building department, and how to plan around it.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Core Fire And Water Damage Restoration Services Available in Blaine County
Any fire leaves several separate problems behind at the same time: an open, unsecured structure, soot everywhere, odor trapped in the materials, water from the hoses and a rebuild waiting at the end. The contractors we connect you with cover every phase, and plenty of them take a job all the way from board-up to final paint.
Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. A responding crew will typically confirm the structure is safe to enter, coordinate with the utility company on power and gas, and board up windows and doors that firefighters had to force or vent. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Truck-mounted or portable extractors pull up the water left by the hoses, and HEPA air scrubbers start capturing the fine soot still floating through the rooms. It is not glamorous work, yet it protects what survived, and most policies require reasonable steps like these to keep the loss from getting worse.
Residential Fire Damage Removal
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some can be cleaned and deodorized and some cannot, and a good contractor will tell you which is which instead of throwing everything in a dumpster.
Commercial Fire Damage Removal
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: lost revenue for every day the doors stay closed. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke reaching electronics, server rooms and paper records. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Soot Removal and Surface Cleaning
Soot is not one thing. Hot, fast fires fed by wood and paper produce a dry, powdery soot that streaks the moment you try to wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. Then there is the furnace puffback, where a misfiring oil burner blows fuel-oil soot through the ducts and into every room of the house.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly affected paint can often be cleaned and kept, while heavily affected drywall may be cheaper to replace than to clean. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Deodorization and Smoke Odor Removal
Cleaning what you can see does not remove what you can smell. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Hot smoke also travels toward cooler areas, so it ends up in closets, cabinets, attics and wall cavities far from where the fire actually burned.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run safely in occupied spaces, or ozone in buildings that are fully vacated. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Sprays and plug-ins just mask the smell for a few days, which is why a layered process matters.
Water Damage From Firefighting
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. That water soaks into subfloors, wall cavities and insulation, and it carries soot with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. They take daily readings until the materials are back to normal moisture levels. Rushing or skipping this step is how a fire claim turns into a mold claim six weeks later.
Contents Pack-Out, Inventory and Cleaning
Personal belongings often need more careful handling than the structure itself. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
Professional contents cleaning uses tools you do not have at home: ultrasonic tanks for dishes and hard goods, ozone chambers for odor, and specialized processes for textiles, documents and electronics. Tell the contractor about family photos, important papers and heirlooms before work starts so they get handled first. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Structural Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. Many restoration contractors handle both phases, so you are not starting over with a new company halfway through.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. It is worth asking how the contractor pulls permits, which trades they subcontract and how scope changes get approved and documented.
How a Fire And Water Damage Restoration Job Typically Runs
No two fires look the same, but the order of operations on a professional job is pretty consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
Call +1-866-484-1409 and a dispatcher asks a few quick questions about where the fire started, whether utilities are on, whether the fire department has cleared the building and whether there is standing water. Then we connect you with an available independent contractor serving Blaine County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project manager walks every room, tests surfaces to identify soot types, takes moisture readings and checks how far smoke traveled. You get a written scope and estimate before major work starts, often in the same Xactimate format adjusters use.
Mitigation, cleaning and drying
Charred materials come out, loose soot is HEPA-vacuumed, surfaces are cleaned with methods matched to the residue, and drying equipment runs until moisture readings come back normal.
Deodorization and HVAC cleaning
Once the cleaning is done, the crew treats lingering odor with thermal fogging, hydroxyl or ozone, and seals any framing that still holds smoke. The ducts get cleaned so the first run of the furnace or AC does not spread soot back through the building.
Rebuild and final walkthrough
Repairs and reconstruction bring the property back to pre-loss condition, followed by a final walkthrough with you to confirm everything on the scope was completed.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Fire And Water Damage Restoration
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
The contractors we connect you with provide a written estimate after they inspect the damage, before major work begins. No surprise line items appear at the end, and any change in scope gets approved by you first. There is never a charge to you for using the referral line.
Fast response, local dispatch
We route your call to an independent crew already working near you, not one driving in from hours away. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. Ask for their license and certificate of insurance and verify them yourself, which is good practice with any contractor and something the good ones expect.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask for it before you sign, along with what happens if smoke odor returns after the job is finished. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Documentation can make or break a fire claim. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet the adjuster on site and walk through the damage with them.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
How Insurance Usually Works After a Fire
Most standard homeowners and commercial property policies cover sudden, accidental fire damage, including smoke damage and the water used to put the fire out. Coverage depends on your specific policy, so read your declarations page and talk to your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Save every receipt, from hotel nights to meals to replacement clothing. Hold onto damaged items until the adjuster sees them, or at least until you have photographed them in detail.
You also have the right to choose your own restoration contractor in most situations. Your carrier may suggest a preferred vendor, which can be fine, but you are usually not obligated to use that company. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Commercial policies add a few wrinkles worth knowing about. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can hand straight to your insurer.
Real Stories From People Who Called After a Fire
Here is what a few callers shared after being connected with an independent restoration contractor.
I called at about 11 at night after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later there was no sign anything had happened.
Danielle R.Homeowner, Blaine County
Our fryer caught and the fire got into the hood. Losing four days of business was painful, but it could have been a lot worse without the crew we got connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. The final invoice matched their estimate.
Marcus T.Restaurant owner, Blaine County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor explained what a puffback is, cleaned the ducts first so we would not keep blowing soot around, and then went room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Blaine County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. The crew boarded up the garage the same day, pulled out the attic insulation that was holding the smell, and sealed the framing. They were straightforward about what they could save and what they couldn't. The smell is completely gone.
James and Priya S.Homeowners, Blaine County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. The contractor kept detailed notes on each unit and gave me separate documentation for each claim. Communication was excellent from start to finish.
Robert M.Property manager, Blaine County
Fire Damage Questions We Hear Every Day
How fast can a Fire And Water Damage Restoration contractor arrive in Blaine County?
When the situation is urgent, such as an open roof, blown-out windows or standing water, many network contractors can usually reach you within a few hours. Real arrival times vary with distance, time of day, weather and local demand. The dispatcher will tell you straight what to expect instead of promising a time that cannot be met.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Using our referral line is always free.
What emergency services are available after a fire?
Typical emergency services are window and door board-up, roof tarping, water extraction, temporary power coordination, HEPA air filtration, and securing the property from weather and intruders. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me operates as a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Open a claim with your carrier right away and ask about Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough job removes or cleans those materials, treats the remaining odor with thermal fogging, hydroxyl or ozone, and seals affected framing before rebuilding. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even small fires release fine particles and chemical residues that can irritate lungs, especially for children, older adults, people with asthma and pets. If the fire department has cleared the home and the damage is limited to one room, you may be able to stay with that area sealed off, but a contractor's assessment is the best way to know. When the smell is throughout the house, staying somewhere else for a few days is usually wiser.
What should I throw away after a fire, and what can be saved?
Discard any food, medicine or cosmetics exposed to heat, smoke or water, along with refrigerated food if the power went out. Beyond that, wait. Many items that look ruined, including hard goods, clothing, furniture and even some electronics, can be professionally cleaned. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A small kitchen fire with limited smoke spread can often be cleaned and deodorized in a few days to two weeks. Larger losses that need drying, demolition and reconstruction can take several weeks to several months, depending on permits, materials and insurance approvals. The contractor should give you a realistic timeline with the written scope.
Do I have to use the contractor my insurance company recommends?
In most cases, no. You generally have the right to choose your own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Serving All of Blaine County With Fire And Water Damage Restoration
Our dispatch line covers all of Blaine County, from the county seat and its suburbs to small towns and unincorporated rural areas. No matter where in the county you are, one phone number connects you with an independent contractor who works nearby.
Fires on rural properties come with a different set of problems. Detached garages, workshops and barns often hold fuel, equipment and stored materials that burn hot and leave heavy residue. Homes on private wells may need the water system inspected if it was used during firefighting, and longer distances make fast board-up all the more important.
Contractors serving Blaine County know which jurisdiction handles your permits and inspections, which can save time once the rebuild starts. You will find the cities and zip codes we serve throughout the county listed below.
Common fire calls around Blaine County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
The Clock Started the Moment the Fire Went Out.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Blaine County.
