Board Up Services in Graham County County, AZ
The fire trucks have pulled away, the smoke is still hanging in the rooms, and you need a qualified crew on site today. Call the dispatch line and we will connect you with an independent restoration crew in Graham County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
The Referral Network People Call When the Fire Is Out
Re Fire Me is a free referral service. We do not swing the hammers or run the dehumidifiers ourselves. What we do is answer the phone at 2 a.m. when your kitchen is black with soot, figure out what kind of loss you are dealing with, and connect you with an independent, licensed and insured fire restoration contractor who works in Graham County and can actually get there.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. Within the first few hours it starts to yellow plastics, discolor grout and tarnish bathroom fixtures. Left alone for a few days, it bonds with paint and wood finishes, and exposed metal starts to corrode. Add the water a fire crew used to knock the fire down, and you now have a drying problem stacked on top of a smoke problem. Mold can begin growing on wet drywall and insulation in as little as 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. When you call, a real person asks where the fire started, whether the power is on, whether the structure has been cleared for entry and whether there is standing water. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors in the network generally do fire and smoke restoration as a core part of their business. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign a work authorization, ask for a copy of the contractor's license and certificate of insurance and confirm both yourself; any reputable restoration company expects that question.
Local knowledge matters too. Crews working across Graham County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Board Up Services Services Available in Graham County
A fire loss is really four or five different problems at once: an unsecured structure, soot on every surface, smoke odor in the building materials, water from firefighting and, eventually, a rebuild. The contractors we connect you with handle each phase, and many handle all of them start to finish.
Emergency Fire Damage Response
The first job after any fire is making sure the damage stops growing. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Standing water from fire hoses gets extracted with truck-mounted or portable units, and air scrubbers fitted with HEPA filters go in to start pulling fine soot out of the air. None of it is glamorous, but it protects what is left, and most insurance policies expect you to take reasonable steps like these to prevent further loss.
Residential Fire Damage Removal
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each source burns differently and leaves a residue that calls for its own cleaning method.
A residential crew usually works one room at a time, pulling out charred materials, HEPA-vacuuming loose soot first so it does not get ground in, using dry chemical sponges on walls and ceilings, and only then wet-cleaning with a degreaser suited to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Fire Damage Removal for Businesses
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: lost revenue for every day the doors stay closed. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Many commercial jobs also need night or weekend schedules, something experienced commercial contractors build in from day one.
Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. Then there is the furnace puffback, where a misfiring oil burner blows fuel-oil soot through the ducts and into every room of the house.
Getting the soot type right comes first, because the wrong method can set the stain permanently. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly smoked paint can usually be saved with cleaning, while drywall saturated with soot is often cheaper to cut out and replace. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Smoke Odor Removal and Deodorization
Cleaning what you can see does not remove what you can smell. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Because hot smoke moves toward cooler spaces, it settles inside closets, attics, cabinets and wall cavities well away from the fire itself.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run while people are present, or ozone when the building is completely empty. Framing and subfloor that still hold odor after cleaning are usually sealed with a shellac-based odor-blocking primer before new drywall goes up. Air fresheners only cover the smell for a few days, and this process aims to remove it.
Water Damage From Firefighting
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. All of it soaks into subfloors, insulation and wall cavities, carrying dissolved soot along with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. They take daily readings until the materials are back to normal moisture levels. Rushing or skipping this step is how a fire claim turns into a mold claim six weeks later.
Contents Pack-Out and Cleaning
Personal belongings often need more careful handling than the structure itself. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
At the facility, contents get cleaned with equipment most people never see: ultrasonic tanks for hard goods, ozone rooms for odor, and specialist processes for clothing, paper and electronics. Mention photos, documents and heirlooms to the contractor up front so those items get priority. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Fire Damage Repair and Reconstruction
Once the property is cleaned, dried and deodorized, the rebuild begins. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. A lot of restoration contractors take the job from mitigation through the final coat of paint, so you are not starting from scratch with a new company mid-project.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. Ask the contractor how they handle permits, whether they use subcontractors and how changes to the scope get approved.
What to Expect From the Board Up Services Process
Every fire is different, but the sequence of work is fairly consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
Call +1-866-484-1409 and a dispatcher asks a few quick questions about where the fire started, whether utilities are on, whether the fire department has cleared the building and whether there is standing water. Then we connect you directly with an available independent contractor that serves Graham County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project lead walks the whole property, tests surfaces to identify the soot, takes moisture readings and traces how far the smoke spread. You get a written scope and estimate before major work starts, often in the same Xactimate format adjusters use.
Mitigation, cleaning and drying
Charred materials come out, loose soot is HEPA-vacuumed, surfaces are cleaned with methods matched to the residue, and drying equipment runs until moisture readings come back normal.
Deodorization and HVAC cleaning
Once the cleaning is done, the crew treats lingering odor with thermal fogging, hydroxyl or ozone, and seals any framing that still holds smoke. HVAC ducts are cleaned so the system does not redistribute soot the first time it runs.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Board Up Services
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. Taking these calls day and night, we have seen what separates a smooth job from a stressful one.
Upfront, written pricing
After inspecting the damage, the contractor puts the estimate in writing before any major work starts. No surprise line items appear at the end, and any change in scope gets approved by you first. There is never a charge to you for using the referral line.
Fast response, local dispatch
We route your call to an independent crew already working near you, not one driving in from hours away. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask to see it before you sign, and ask specifically how they handle it if smoke odor comes back after they leave. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Fire claims live and die on documentation. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet the adjuster on site and walk through the damage with them.
One call covers every phase
Board-up, water extraction, soot cleaning, odor removal, contents and rebuild are often handled by the same contractor, so you are not juggling five phone numbers.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. What is covered depends on your exact policy, so check your declarations page and ask your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the loss to your insurer as soon as possible and ask whether your policy includes Additional Living Expenses (ALE), which can cover a hotel or rental if the home is not livable. Keep receipts for everything: meals, lodging, clothing and emergency purchases. Do not throw out damaged belongings until the adjuster has seen them or you have photographed them thoroughly.
You also have the right to choose your own restoration contractor in most situations. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read work authorizations carefully, and think twice before signing an assignment of benefits unless you understand the rights you would be transferring.
When the contractor and the adjuster disagree about scope, the contractor's photos, moisture logs and line-item estimate are what settle it. That is one more reason to work with a crew that documents carefully from day one.
Commercial policies add a few wrinkles worth knowing about. Business interruption coverage, if you carry it, may replace lost income while you are closed, and it usually depends on proving the restoration timeline. Ask the contractor for dated progress reports you can hand straight to your insurer.
Real Stories From People Who Called After a Fire
These are accounts from people who called the dispatch line and were connected with an independent contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Graham County
Our fryer caught and the fire got into the hood. We lost four days of business, which hurt, but it would have been much worse without the crew we were connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. Their estimate matched the final invoice.
Marcus T.Restaurant owner, Graham County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I honestly did not know where to start. The contractor explained what a puffback is, cleaned the ducts first so we would not keep blowing soot around, and then went room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Graham County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were honest about what could be saved and what had to go. The smell is completely gone.
James and Priya S.Homeowners, Graham County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed someone who could coordinate between tenants, the owner's insurance and the tenants' renters policies. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Graham County
Answers to Common Fire Damage Questions
How fast can a Board Up Services contractor arrive in Graham County?
For urgent situations like an open roof, broken windows or standing water, many independent contractors in our network can be on site within a few hours of your call. Real arrival times vary with distance, time of day, weather and local demand. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency measures such as board-up or water extraction may begin immediately to stop further damage, and the contractor should explain how those are billed first. Calling our referral line costs you nothing.
What emergency services are available after a fire?
Typical emergency services are window and door board-up, roof tarping, water extraction, temporary power coordination, HEPA air filtration, and securing the property from weather and intruders. Many crews can also pull out urgent belongings such as medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect callers with independent local contractors, licensed and insured, who carry out the work and are responsible for it. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Call your insurer to open a claim, and ask whether you have Additional Living Expenses coverage. Experienced fire contractors can supply photos, moisture logs and estimates to support the claim.
Can smoke smell really be removed, or will it come back?
Yes, when the job is done properly. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even small fires release fine particles and chemical residues that can irritate lungs, especially for children, older adults, people with asthma and pets. If the fire department has cleared the home and the damage is limited to one room, you may be able to stay with that area sealed off, but a contractor's assessment is the best way to know. If there is a lingering smell throughout the house, staying elsewhere for a few days is usually the safer choice.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond that, wait. A lot of things that look ruined, from dishes and clothing to furniture and some electronics, respond well to professional cleaning. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A small kitchen fire with limited smoke spread can often be cleaned and deodorized in a few days to two weeks. Bigger losses involving drying, demolition and rebuilding can run several weeks to a few months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
In most cases, no. You generally have the right to choose your own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Check your policy language, and let your adjuster know which contractor you have chosen so they can coordinate.
Serving All of Graham County With Board Up Services
Our dispatch line covers all of Graham County, from the county seat and its suburbs to small towns and unincorporated rural areas. Wherever your property sits in the county, the same number connects you with an independent contractor who works in your area.
Fires on rural properties come with a different set of problems. Detached garages, workshops and barns often hold fuel, equipment and stored materials that burn hot and leave heavy residue. Properties on well water may need the water system checked if firefighters drew from it, and longer drive times make early emergency board-up even more important.
Contractors serving Graham County know which jurisdiction handles your permits and inspections, which can save time once the rebuild starts. You will find the cities and zip codes we serve throughout the county listed below.
Common fire calls around Graham County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
The Clock Started the Moment the Fire Went Out.
Every hour that soot and water sit, the restoration bill grows. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Graham County.
