Board Up Services in Crawford County County, OH
The fire trucks have pulled away, the smoke is still hanging in the rooms, and you need a qualified crew on site today. Call the dispatch line and we will connect you with an independent restoration crew in Crawford County, licensed and insured, that can board up openings, pull out firefighting water and start soot cleanup the same day.
- Licensed & insured independent pros
- Upfront written estimates
- Board-up & roof tarping
- Insurance-ready documentation
A Fire Damage Referral Network Built for Your Worst Day
Re Fire Me is a free referral service. We do not swing the hammers or run the dehumidifiers ourselves. What we do is pick up at any hour, ask the handful of questions that tell us what kind of fire loss you have, and route you to an independent, licensed and insured restoration contractor serving Crawford County that has the equipment and the availability to respond.
That distinction matters, and we would rather you hear it from us up front. The contractor you speak with is an independent business. They set their own pricing, carry their own license and insurance, and write their own estimates. Our role is to cut down the time between the fire department leaving and a qualified restoration crew arriving.
Fire damage does not hold still. Soot is acidic. In the first few hours, acidic soot begins yellowing plastic surfaces, staining grout and tarnishing chrome and brass fixtures. Left alone for a few days, it bonds with paint and wood finishes, and exposed metal starts to corrode. Add the water a fire crew used to knock the fire down, and a wet-structure problem is building underneath the smoke damage. Wet drywall, subfloor and insulation can start growing mold within 24 to 48 hours. The longer it all sits, the bigger the final bill.
That is why the dispatch line runs 24 hours a day, every day of the year, holidays included. Fires do not wait for business hours, and a lot of the calls we take come in between midnight and dawn, right after the fire department clears the scene. A live dispatcher will ask where the fire started, whether utilities are still on, whether the fire marshal has cleared the building and whether water is standing anywhere. Those answers decide whether you need an emergency board-up crew tonight, a water extraction team first thing in the morning, or a soot and odor specialist to start a full assessment.
The independent contractors we route calls to typically handle fire and smoke work every week, not once a year. Many follow the ANSI/IICRC S700 standard for fire and smoke damage restoration and the S500 standard for water damage. Before you sign a work authorization, ask for a copy of the contractor's license and certificate of insurance and confirm both yourself; any reputable restoration company expects that question.
Local knowledge matters too. Crews working across Crawford County deal with everything from in-town homes and apartment buildings to rural properties with detached garages, barns and long gravel driveways. They know whether your address falls under a city permit office or the county building department, and they plan the rebuild around that.
What happens when you call +1-866-484-1409
- A live dispatcher answers, not a voicemail box
- You answer a few quick questions about the fire
- We connect you with an available independent contractor near you
- The contractor confirms arrival time and next steps directly with you
Full-Scope Board Up Services Services Available in Crawford County
A fire loss is really four or five different problems at once: an unsecured structure, soot on every surface, smoke odor in the building materials, water from firefighting and, eventually, a rebuild. The contractors we connect you with handle each phase, and many handle all of them start to finish.
Emergency Fire Damage Response
The first visit after a fire is about stopping the damage from spreading. On an emergency call, the crew normally checks that the building is safe to enter, works with the utility on gas and electric, and boards up the windows and doors firefighters broke out to ventilate. If the roof was opened up, it gets tarped the same night so rain does not finish what the fire started.
Standing water from fire hoses gets extracted with truck-mounted or portable units, and air scrubbers fitted with HEPA filters go in to start pulling fine soot out of the air. It is not glamorous work, yet it protects what survived, and most policies require reasonable steps like these to keep the loss from getting worse.
Home Fire Damage Removal and Cleanup
Most of the calls we route are house fires, and most house fires start in the kitchen. An unattended pan can leave a nearly invisible protein residue on every surface in the home, a greasy film with a sour odor that ordinary cleaners just smear around. Other common sources are dryer vents packed with lint, space heaters, overloaded extension cords, candles and lithium-ion batteries from e-bikes and power tools. Each one leaves a different kind of residue and needs a different cleaning approach.
Residential crews work room by room: removing charred materials, HEPA-vacuuming loose soot before anyone touches it with a wet rag, cleaning walls and ceilings with dry chemical sponges, then wet-cleaning with degreasers matched to the residue. Carpets, window treatments, mattresses and upholstered furniture get evaluated individually. Some items come back fine after professional cleaning and some do not, and a good contractor explains the difference instead of hauling everything to the curb.
Commercial Fire Damage Removal
A fire in a restaurant, store, office or warehouse has a second clock running alongside the damage: every day the business stays closed costs real money. Commercial crews build the plan around reopening, often walling off the damaged zone with 6-mil poly and negative air machines so the rest of the building can keep running.
Restaurant fires are their own category. A hood or fryer fire leaves heavy grease soot through the exhaust system, stainless surfaces and walk-ins, and the local health inspector will expect proper cleaning before service resumes. Offices raise different problems, mainly corrosive smoke getting into computers, network closets and paper files. Commercial jobs usually need after-hours or weekend scheduling, which experienced commercial contractors are used to arranging.
Soot Removal and Surface Cleaning
Soot is not one thing. A fast, hot fire burning wood and paper leaves dry, powdery soot that smears if you wipe it. Slow, smoldering fires involving plastics and synthetic foam leave wet, oily soot that is thick, sticky and strong-smelling. Kitchen fires leave protein residue. An oil burner malfunction, called a puffback, sprays fine fuel-oil soot through the ductwork into every room.
Identifying the soot type comes first, because the wrong method makes things worse. Dry soot calls for HEPA vacuuming followed by dry chemical sponges, while oily soot needs solvent-based or alkaline cleaners. Lightly affected paint can often be cleaned and kept, while heavily affected drywall may be cheaper to replace than to clean. Tile, countertops and fixtures should be cleaned quickly, because acidic soot etches them the longer it sits.
Deodorization and Smoke Odor Removal
Getting the visible soot off is only half the job, because the smell is a separate problem. Smoke is made of tiny particles and gases that push into every porous material in the house: drywall, insulation, wood framing, carpet pad, clothing and the inside of the HVAC system. Hot smoke also travels toward cooler areas, so it ends up in closets, cabinets, attics and wall cavities far from where the fire actually burned.
Real odor removal happens in stages. First the source material is removed or cleaned. Then the crew treats what remains with thermal fogging, which mimics the way smoke penetrated, plus hydroxyl generators that can run safely in occupied spaces, or ozone in buildings that are fully vacated. Any framing or subfloor that still holds odor after cleaning is typically sealed with a shellac-based odor-blocking primer before rebuilding. Air fresheners only cover the smell for a few days, and this process aims to remove it.
Firefighting Water Extraction and Drying
It surprises a lot of property owners that the water ends up causing as much trouble as the flames. A single fire hose can put out well over a hundred gallons a minute, and sprinkler heads, burst pipes and melted supply lines add more. All of it soaks into subfloors, insulation and wall cavities, carrying dissolved soot along with it.
Drying a fire-damaged structure follows the same principles as any other water job. Crews map moisture with meters and thermal imaging, extract standing water, remove soaked materials that cannot be dried, and set up commercial air movers and low-grain refrigerant dehumidifiers. They take daily readings until the materials are back to normal moisture levels. Skipping or rushing the drying is how a fire claim becomes a mold problem a month or two down the road.
Contents Pack-Out, Inventory and Cleaning
Your belongings often need more care than the building. When a room has to be gutted or deep-cleaned, the crew packs out salvageable items, photographs and inventories each box, and moves everything to a secure facility for cleaning. The inventory doubles as documentation for your insurance claim.
At the facility, contents get cleaned with equipment most people never see: ultrasonic tanks for hard goods, ozone rooms for odor, and specialist processes for clothing, paper and electronics. Tell the contractor about family photos, important papers and heirlooms before work starts so they get handled first. Electronics exposed to smoke should not be powered on until they are checked, because corrosive residue can short them out.
Fire Damage Repair and Reconstruction
After cleaning, drying and deodorization are finished, reconstruction can start. That can be as small as replacing a section of drywall and repainting a kitchen, or as big as reframing walls, replacing roof trusses, rewiring circuits and installing new cabinets, flooring and windows. A lot of restoration contractors take the job from mitigation through the final coat of paint, so you are not starting from scratch with a new company mid-project.
Most fire rebuilds require permits and inspections. Wiring exposed to heat should be evaluated by a licensed electrician, and charred framing gets assessed for depth of char to decide whether it can be cleaned and sealed, sistered or replaced. It is worth asking how the contractor pulls permits, which trades they subcontract and how scope changes get approved and documented.
What to Expect From the Board Up Services Process
No two fires look the same, but the order of operations on a professional job is pretty consistent. Here is what to expect from the first phone call to the final walkthrough.
Call the dispatch line
When you call +1-866-484-1409, a dispatcher asks where the fire began, whether the power and gas are on, whether the building has been cleared for entry and whether water is standing anywhere. Then we connect you with an available independent contractor serving Crawford County.
Arrival and safety check
The crew arrives, confirms the structure is safe to enter and photographs everything before touching anything. Emergency measures such as board-up, roof tarping and water extraction happen right away.
Assessment and written scope
A project manager walks every room, tests surfaces to identify soot types, takes moisture readings and checks how far smoke traveled. You receive a written scope and estimate before major work begins, frequently in the Xactimate format most insurance adjusters work with.
Mitigation, cleaning and drying
Charred materials come out, loose soot is HEPA-vacuumed, surfaces are cleaned with methods matched to the residue, and drying equipment runs until moisture readings come back normal.
Deodorization and HVAC cleaning
With cleaning complete, remaining odor gets treated with thermal fogging, hydroxyl or ozone, and smoke-stained framing is sealed. HVAC ducts are cleaned so the system does not redistribute soot the first time it runs.
Rebuild and final walkthrough
Reconstruction returns the property to its pre-loss condition, and the job closes with a walkthrough where you confirm every line on the scope was done.
Before the crew arrives: do this
- Stay out until the fire department says the building is safe
- Call your insurance company and open a claim
- Photograph and video every room if you can safely enter
- Keep the HVAC system turned off
- Throw out food, medicine and cosmetics exposed to heat or smoke
- Wear an N95 or better respirator if you must go inside
And avoid this
- Wiping soot off walls or upholstery, which smears and sets it
- Turning on ceiling lights or fans if the ceiling is wet
- Powering on electronics or appliances exposed to smoke
- Sending smoky clothes to a regular dry cleaner
- Throwing out damaged items before your adjuster documents them
Why Callers Trust Re Fire Me With Board Up Services
Most people calling us have never hired a fire restoration company and have no idea what a good one looks like. From the calls we take every day, these are the things that make the biggest difference to how the job goes.
Upfront, written pricing
After inspecting the damage, the contractor puts the estimate in writing before any major work starts. No surprise line items appear at the end, and any change in scope gets approved by you first. There is never a charge to you for using the referral line.
Fast response, local dispatch
We route your call to an independent crew already working near you, not one driving in from hours away. On true emergencies like an open roof or missing windows, many contractors in the network can be on site within a few hours. Exact arrival times depend on location, weather and demand, and the dispatcher will tell you honestly what to expect.
Licensed & insured independent pros
Every call goes to an independent, licensed and insured business that does fire and smoke restoration as regular work. We still recommend asking for their license and certificate of insurance and verifying both yourself, which is smart with any contractor.
Work they stand behind
Reputable restoration contractors put their workmanship warranty in writing. Ask for it before you sign, along with what happens if smoke odor returns after the job is finished. Any warranty is between you and the contractor, who is responsible for their own work.
Insurance-ready documentation
Fire claims live and die on documentation. Contractors used to fire work photograph every room, log moisture readings, inventory contents and write estimates in formats adjusters recognize. Many will meet the adjuster on site and walk through the damage with them.
One call covers every phase
From board-up and water removal to soot cleaning, deodorization, contents and rebuild, one contractor can often handle the whole job, so you are not juggling five different companies.
Working With Your Insurance After a Fire
Most standard homeowners and commercial property policies cover sudden and accidental fire, along with resulting smoke damage and water from firefighting. What is covered depends on your exact policy, so check your declarations page and ask your agent or adjuster. Re Fire Me is not an insurance company and cannot tell you what your policy will pay, but we can tell you what usually helps a claim go smoothly.
Report the fire to your carrier quickly and ask about Additional Living Expenses, or ALE, which may pay for temporary housing if you cannot stay in the home. Keep receipts for everything: meals, lodging, clothing and emergency purchases. Hold onto damaged items until the adjuster sees them, or at least until you have photographed them in detail.
You also have the right to choose your own restoration contractor in most situations. Your insurer may recommend a preferred vendor, and that can work well, but you are generally not required to use them. Read any work authorization carefully, and be cautious about signing an assignment of benefits without understanding exactly what rights you are handing over.
If the contractor and the adjuster see the scope differently, detailed photos, moisture logs and a line-item estimate are what resolve it. That is one more reason to work with a crew that documents carefully from day one.
Business owners have a few extra policy details to keep in mind. If you carry business interruption coverage, it may help replace lost income during the shutdown, which makes a documented restoration timeline especially important. Ask the contractor for dated progress reports you can pass directly to your carrier.
What Callers Say About Their Fire Damage Recovery
Here is what a few callers shared after being connected with an independent restoration contractor.
It was close to 11 at night when I called, right after a grease fire in my kitchen. The fire department had already left and the whole first floor smelled like burnt oil. The dispatcher asked a few questions and had me talking to a restoration company within ten minutes. Their crew came the next morning, showed me how the residue had spread into the cabinets and upstairs hallway, and gave me a written estimate before they started. Three weeks later you would not know anything happened.
Danielle R.Homeowner, Crawford County
Our fryer caught and the fire got into the hood. We lost four days of business, which hurt, but it would have been much worse without the crew we were connected with. They worked overnight so we could prep during the day, cleaned the hood ducts and the walk-in, and had everything ready for the health inspector. The final invoice matched their estimate.
Marcus T.Restaurant owner, Crawford County
Oil burner puffback. Black soot on every wall in the house, even rooms that were shut. I had no idea what to do. The contractor explained what a puffback is, cleaned the ducts first so we would not keep blowing soot around, and then went room by room. They also worked directly with my insurance adjuster, which took a lot of stress off me.
Linda K.Homeowner, Crawford County
An e-bike battery started a fire in our garage. The garage was gutted and smoke got into the house through the attic. They had the garage boarded up the same day, then removed the smoky attic insulation and sealed the framing. They were straightforward about what they could save and what they couldn't. The smell is completely gone.
James and Priya S.Homeowners, Crawford County
I manage a small apartment building, and a fire in one unit sent smoke into two others and the hallway. I needed a contractor who could juggle the tenants, the owner's insurance and several renters policies at once. They kept separate notes and photos for every unit, so each claim had its own documentation. Communication was excellent from start to finish.
Robert M.Property manager, Crawford County
Fire Damage Questions We Hear Every Day
How fast can a Board Up Services contractor arrive in Crawford County?
For urgent situations like an open roof, broken windows or standing water, many independent contractors in our network can be on site within a few hours of your call. Exact timing depends on your location, the time of day, weather and how busy local crews are. The dispatcher will give you an honest estimate on the call rather than promising a time no one can meet.
Do you provide upfront pricing?
Yes. After inspecting the property, the contractor provides a written estimate before any major work starts. Emergency steps like board-up or water extraction may start right away to prevent further damage, and the contractor should explain those charges before beginning. Using our referral line is always free.
What emergency services are available after a fire?
Typical emergency services are window and door board-up, roof tarping, water extraction, temporary power coordination, HEPA air filtration, and securing the property from weather and intruders. Many contractors can also pack out critical belongings like medications, documents and electronics on the first visit.
Is Re Fire Me the company that does the work?
No. Re Fire Me is a free referral service. We connect you with independent, licensed and insured local contractors who perform and are responsible for the work. Before authorizing work, verify the contractor's license and insurance yourself.
Will my homeowners insurance cover fire damage removal?
Standard homeowners policies usually cover sudden and accidental fire, smoke and firefighting water damage, though the details depend on your own policy and deductible. Open a claim with your carrier right away and ask about Additional Living Expenses coverage. Contractors used to fire work can provide photos, moisture logs and estimates that support your claim.
Can smoke smell really be removed, or will it come back?
It can be removed when the work is done right. Odor comes back when the source is left behind, usually in insulation, framing, ductwork or contents. A thorough process removes or cleans those materials, treats lingering odor with thermal fogging, hydroxyl or ozone, and seals smoke-affected framing before the walls close up. It is fair to ask the contractor what they do if odor resurfaces later.
Is it safe to stay in my home after a small fire?
Even small fires release fine particles and chemical residues that can irritate lungs, especially for children, older adults, people with asthma and pets. If the fire department clears the home and the damage is limited to one room, staying may be possible with that area closed off, but a professional assessment is the safest way to decide. If there is a lingering smell throughout the house, staying elsewhere for a few days is usually the safer choice.
What should I throw away after a fire, and what can be saved?
Throw away food, medicine and cosmetics that were exposed to heat, smoke or firefighting water, including food in the refrigerator if power was lost. Beyond that, wait. A lot of things that look ruined, from dishes and clothing to furniture and some electronics, respond well to professional cleaning. Keep everything until your adjuster has seen it or you have documented it with photos.
How long does fire damage restoration take?
A small kitchen fire with limited smoke spread can often be cleaned and deodorized in a few days to two weeks. Bigger losses involving drying, demolition and rebuilding can run several weeks to a few months, depending on permits, materials and insurance approvals. Expect a realistic timeline from the contractor along with the written scope.
Do I have to use the contractor my insurance company recommends?
Usually not. Most policyholders can choose their own restoration contractor. Your carrier's preferred vendor can be a good option, but the choice belongs to you. Review your policy wording and tell your adjuster which contractor you picked so they can coordinate.
Board Up Services Coverage Throughout Crawford County
The dispatch line serves every corner of Crawford County, from the larger towns and suburbs out to the small communities and unincorporated land. Wherever your property sits in the county, the same number connects you with an independent contractor who works in your area.
Fires on rural properties come with a different set of problems. Detached garages, workshops and barns often hold fuel, equipment and stored materials that burn hot and leave heavy residue. Homes on private wells may need the water system inspected if it was used during firefighting, and longer distances make fast board-up all the more important.
Contractors serving Crawford County know which jurisdiction handles your permits and inspections, which can save time once the rebuild starts. You will find the cities and zip codes we serve throughout the county listed below.
Common fire calls around Crawford County
- Kitchen and grease fires
- Garage, workshop and barn fires
- Chimney and wood stove fires
- Electrical and wiring fires
- Furnace puffbacks
- Commercial and restaurant fires
Smoke Damage Spreads Fast. Get Help Today.
Fire damage gets more expensive every hour it sits. Call +1-866-484-1409 now to be connected with an independent, licensed and insured restoration contractor in Crawford County.
